Panasonic CZ-CWEBC2 Operation Manual page 32

8 Initial Settings
(1) Adding a New User
If you click on the "Add" button, the following screen will be displayed:
If a user is added, that user will be registered as the lowest user number to which no user is
currently registered.
No user number to be used for registration can be skipped.
Enter a user ID (within 20 characters).
Enter a password (within 10 characters).
For reconfi rmation, enter the same password as that in Step
characters will not be displayed on the screen.)
Select the type of user authority, "Special" or "General" .
A list of the tenants of whom monitoring and operations are not allowed for that user is
displayed.
A list of the tenants of whom monitoring and operations are allowed for that user is displayed.
After selecting a tenant or several tenants on the list at the left or right, perform the
operations described below.
Several tenants can be simultaneously selected in the following ways:
• While holding the Ctrl key pressed, click on the tenants you wish to select one by one.
• After selecting one tenant, click on another tenant while holding the Shift key pressed.
All the tenants displayed between the selected tenants will be selected.
The tenant(s) selected on the left list will be moved to the right list and registered as
operable target(s).
The tenant(s) selected on the right list will be moved to the left list and registered as
inoperable target(s).
31
3 4
Main
. (In Steps and , input
Sub