Installation Manual TY-WK15TA2U Model No. Thank you very much for purchasing the wall mount kit for the Panasonic Combination LCD TV / DVD Player and LCD TV. Please perform installation work correctly after carefully reading this installation manual and the operation manual for the Combination LCD TV / DVD Player and LCD TV.
Safety Precautions Be sure to follow To prevent injury to the user and others and to prevent damage to property, direc- tions that must be followed are explained as shown below. The following displays categorize the degree of danger when mishandled. Possibility of serious injury and even death WARNING when mishandled.
Page 3
CAUTION Installation Do not install in humid or dusty Do not install with the Combina- areas, or where the Combination tion LCD TV / DVD Player and LCD TV / DVD Player and LCD TV LCD TV facing downward, on its may be exposed to lampblack, side, or upside down.
Page 4
Components Before starting installation, first check that all components have been supplied. Bracket mounting screw A Wall mounting bracket A (main unit side) ( 4 ) (main unit side) Angle fixing screw (for main unit side / wall side fixing) ( 2 ) (M4 ×...
Page 5
To guarantee Combination LCD TV / DVD Player and LCD TV performance and prevent problems, do not install in locations such as the following: Near sprinklers or heat / smoke detectors Where there is a risk of vibration or impact Near high voltage wires or motors Near sources of magnetism, heat, water vapor or soot Exposed to air from heating equipment...
Page 6
Sample installation layout (Example) When installing for a TC-11LV1 Bracket mounting screw B × 4 units (ø4 × 25 mm) Wall mounting Wall mounting LCD television bracket A bracket B (TC-11LV1) (main unit side) (wall side) Fall prevention string × 2 units Bracket mounting Angle fixing screw A ×...
Installation procedure Check the strength of the intended installation position The weight of the Combination LCD TV / DVD Player and LCD TV installed on the wall mounting bracket is approximately 3.2–5.0 kg. Referring to the dimension drawing below, check the wall strength at the 4 mounting positions.
Page 8
Installation procedure (Cont'd) Preparation of wall mounting bracket A Attach the fall prevention strings Attach the fall prevention strings (2 units) from the holes on the rear of wall mounting bracket A (main unit side).
Page 9
Preparation of television For the TC-11LV1 Before installation, remove the AC adapter and connection cable attached to the Combination LCD TV / DVD Player. Fit the television correctly and securely. Remove the television stand Remove the 4 screws. Remove the television stand. Fit wall mounting bracket A.
Page 10
Installation procedure (Cont'd) For the TC-15LV1/TX-15LV1 Before installation, remove the AC adapter and connection cable attached to the Combination LCD TV / DVD Player. Remove the cable cover (page 8 in the television manual) and the stand cover (page 9 in the television manual). Fit the television correctly and securely.
Page 11
For the TC-20LA1 Before starting work, remove the AC adapter and cable connected to the LCD TV. Perform fitting correctly and securely. Remove the stand cover Remove the one screw. Lift the lower edge of the stand cover toward yourself. Slowly and carefully pull down- ward to remove.
Page 12
Installation procedure (Cont'd) For the TC-20LA1 Remove the TV stand. Remove the four screws. Remove the TV stand. Attach the wall hanging bracket A. Align the holes in the wall hanging bracket A with the screw holes in the LCD TV. Securely fasten the 4 bracket fitting screws A (M4 x12 mm).
Page 13
For the TC-17LA1 / TC-14LA1 Before starting work, remove the AC adapter and cable connected to the LCD TV. Perform fitting correctly and securely. Remove the stand cover Remove the one screw. D2映像 >PS< 日本製 左 Lift the lower edge of the stand 音声...
Page 14
Installation procedure (Cont'd) For the TC-17LA1 / TC-14LA1 Attach the wall hanging bracket A. Align the holes in the wall hanging bracket A with the screw holes in the LCD TV. Securely fasten the 4 bracket fitting screws A (M4 x12 mm). Refit the stand cover.
Page 15
Connection cable routing Using the cable clamp. Wrap the clamp around one cable and pass the tip through Innermost slot the innermost slot. Wrap the clamp around the rest of the cables and pass the tip through the outermost slot. Outermost slot Cable routing complete (Example) TC-11LV1...
Page 16
Attaching the Combination LCD TV / DVD Player and LCD TV to the wall mounting bracket B (wall side) Installing on the wall Be sure to fit the two fall pre- vention cords to the hangers on wall mounting bracket B. Hang the Combination LCD TV / DVD Player and LCD TV on wall mounting bracket B.
Page 17
Install at the desired angle. Upper notch ° upsweep This Combination LCD TV / DVD Player and LCD TV wall mount- ing bracket can be installed in 4 Fixing angles : 5° upsweep, vertical, 5° hole downsweep and 10° downsweep. Set the angle by adjusting the Lower notch notches of wall mounting bracket...
Page 18
Wall mounting bracket fastening To prevent the main unit from fall- Fixing hole ing, fix the main unit using angle fix- ing screws (2 units) from both sides using the fixing holes located on wall mounting brackets A and B (main unit side and wall side).
Page 19
LCD television removal Fixing hole Remove the angle fastening screws (x2) fitted to the left and right sides of the wall mounting bracket. Angle fixing screw (M4 × 12 mm) While lifting the Combination LCD TV / DVD Player and LCD TV, pull it away from the wall and remove.