Table of Contents
Advertisement
Access Control
If you enable wireless access control, only those clients whose wireless MAC
addresses are in the access control list will be able to connect to this unit.
When this option is enabled, no wireless clients will be able to connect if the list
contains no entries.
When the settings are complete, click "Apply".
≥ The settings will be applied after you click "Refresh" and wait for a while.
≥ To reconfigure the settings, click "Back".
Item
Wireless Access Control Mode
MAC Address
Comment
Current Access Control List
Del
Delete All
Description
Select the Wireless Access Control
mode setting from the pull down
menu.
This is a security control function;
only those clients registered in the
access control list can link to this unit.
Input the MAC address of client to
register this unit access capability.
Input the comment tag for the
registered client.
It shows the registered clients that are
allowed to link to this unit.
Click to delete the selected clients
that will be access right removed from
this unit.
Click to delete all the registered
clients from the access allowed list.
- 20 -
Advertisement
Table of Contents
