Tuner For Analog Tv Only; Specifi Cations - Panasonic CY-TUP153N Operating Instructions Manual

Hide thumbs Also See for CY-TUP153N:
Table of Contents

Advertisement

Troubleshooting
Product Servicing
31
If the suggestions in the charts do not solve the problem,
we recommend that you take it to your nearest authorized
Panasonic Service Centre. The product should be serviced
only by a qualifi ed technician.
Replacing the Fuse
Use fuses of the same specifi ed rating (3 A). Using
different substitutes or fuses with higher ratings, or
connecting the unit directly without a fuse, could cause
fi re or damage to the unit.
If the replacement fuse fails, contact your nearest
Panasonic Service Centre for service.

Tuner for Analog TV only

This unit is not compatible with digital
television broadcasts.
Transition from analog TV broadcasts to digital TV
broadcasts:
Digital television broadcasts have begun in some
countries and regions. They are scheduled to spread
gradually into other countries and regions.
32
CY-TUP153N
(continued)
If the Unit Fails to Operate
Reset switch
Insert a hard, slender stick into the hole and push the
switch.
IMPORTANT
Press the switch only when the unit fails to operate.
(Stored settings and adjustments are not cleared.) If the
unit fails to return to normal condition, call the nearest
Panasonic Service Centre and ask for repairs.
Impact on this unit:
Some countries and regions are gradually changing
analog TV broadcast channels to secure the broadcast
channels required for the start of digital TV broadcasting.
Therefore, the following effects are anticipated, but they
are not defects of this unit:
 It may become impossible to receive broadcasts of
previously memorized channels.
 A previously memorized channel may start receiving a
different television station.
 Some channels may be selected (memorized) for which
the image cannot be displayed.
Remedy:
Check this instructions and re-select the channels (change
those memorized).
Specifi cations
General
Power supply:
DC 12 V (11 V–16 V), test
voltage 14.4 V,
negative ground
Current consumption:
Less than 0.5 A
Video output signal:
Composite video signal, 1.0
Vp-p (75 )
Audio output signal:
1 Vrms at 400 Hz
(With 100 % modulation)
Dimensions (WHD):
15622.5150 mm
Weight:
650
TV Section
Usable Sensitivity:
36 dB/µV
Diversity Antenna
Power supply:
DC 12 V (11 V–16 V), test
voltage 14.4 V,
negative ground
Current consumption:
Less than 0.1 A
75 4 (with mini plug)
Output impedance:
Cord length:
6 m
Dimensions (WHD):
48034020 mm
Weight (each unit):
330 (including the cable)
Note:
 Specifi cations and design are subject to modifi cation
without notice due to improvements.
 Some fi gures and illustrations on this manual may be
different from your product.
Sales and Support Information
For UK and Ireland customers only.
Customer Care Centre
 For customers within the UK: 08705 357357
 For customers within the Republic of Ireland: 01 289
8333
 Visit our website for product information
 E-mail: customer.care@panasonic.co.uk
Direct Sales at Panasonic UK
 Order accessories and consumable items for your
product with ease and confi dence by phoning our
Customer Care Centre Monday - Thursday 9:00am -
5:30pm, Friday 9:30am - 5:30pm. (Excluding public
holidays).
 Or go on line through our Internet Accessory ordering
application at www.panasonic.co.uk.
 Most major credit and debit cards accepted.
 All enquiries transactions and distribution facilities are
provided directly by Panasonic UK Ltd.
 It couldn't be simpler!
 Also available through our Internet is direct shopping
for a wide range of fi nished products, so take a browse
on our website for further details.
CY-TUP153N
32
33

Advertisement

Table of Contents
loading

Table of Contents