Panasonic CQ-C3301N Operating Instructions Manual page 19

E
Troubleshooting
N
G
L
I
S
■
H RDS
35
Problem
PS does not appear
A PS code cannot be received for the reason of bad receiving conditions, etc.
even if an RDS station
aA PS code appears if it is received. Wait for a while until conditions
is tuned in to.
change.
("NO PS" appears.)
When the station changed between programs, the unit could not receive the
Receiving programs
PTY code.
differs from PTY that
aAn appropriate programme is searched for and tuned in to after receiv-
was already set up.
ing a corresponding PTY code. Therefore, wait for a while.
Any specified PTY programs cannot be received. There is no desired pro-
"NONE" appears
gramme being broadcast in your area.
when selecting PTY.
aSelect another PTY, or wait until a desired programme starts.
The unit received a station broadcasting time that is not appropriate for you,
The clock time (CT) is or the unit is receiving a station that does not broadcast time.
not accurate. aReceive a station broadcasting time that is appropriate for your area, or
adjust CT manually.
There is little difference in receiving conditions between the current station
An AF station cannot
and AF stations. Update of the AF list ended in failure.
be received even if AF
aWait until the AF list is successfully updated. For unstable reception,
indicator lights.
tune in to a stable station by the hand.
■
CD
Problem
The disc is inserted upside down.
aInsert a disc correctly.
No playback or disc
ejected
There is a flaw or foreign object on the disc.
aRemove the foreign object, or use a flawless disc.
Sound skipping or There is a flaw or foreign object on the disc.
noise aRemove the foreign object, or use a flawless disc.
The unit is not sufficiently secured.
aSecure the unit to the console box.
Sound skipping due to
vibration
The unit is tilted at over 30˚ in the front-to-end direction.
aMake the angle 30˚ or less.
Something such as a peeled label obstructs the disc coming out.
aConsult your dealer.
The microcontroller in the unit operates abnormally due to noise or other fac-
Disc unejectable
tors.
aUnplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
36
CQ-C3301N
(continued)
Possible cause a Possible solution
Possible cause Possible solution
a
■
MP3/WMA
Problem
The disc has unplayable formatted data.
No playback or disc
aRefer to the description about MP3/WMA for playable sound data except
ejected
CD-DA (i.e. music CD).
The playability of some CD-R/RWs may depend on the combination of media,
The CD-R/RWs that are
recording software and recorder to be used even if these CD-R/RWs are
playable on other
playable on other devices such as a PC.
devices are not
aMake CD-R/RWs in a different combination of media, recording software
playable on this unit.
and recorder after referring to the description about MP3/WMA.
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc. For MP3/WMA, refer
Sound skipping or
to the description about MP3/WMA.
noise
Playing VBR (Variable Bit Rate) files may cause sound skipping.
aPlay Non-VBR files.
Note:
¡Refer to "Notes on MP3/WMA". (a Page 22)
Possible cause a Possible solution
CQ-C3301N
E
N
G
L
I
S
H
36
37