Electrolux GA60LIWE User Manual page 6

6 www.aeg.com
It is possible to change predefined
sound of buttons to a loudly one by
pressing together Mode and
3.2 Display
A) Timer indicator
B) COOLMATIC function
C) Holiday function
D) Temperature indicator
E) Alarm indicator
3.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off.
The temperature indicators show the set
default temperature.
To select a different set temperature
refer to "Temperature regulation".
If "dEMo" appears on the display, refer
to "Troubleshooting" chapter.
3.4 Switching off
1. Press the appliance ON/OFF button
for 5 seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.
3.5 Temperature regulation
Set the temperature of the appliance by
pressing the temperature regulator.
Default set temperature:
• +5°C for the fridge.
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
temperature colder button for some
seconds. Change is reversible.
A B C
H G F E
F) ChildLock function
G) MinuteMinder function
H) DYNAMICAIR function
3.6 Door open alarm
An acoustic alarm will sound if the door
is left open for a few minutes. The door
open alarm conditions are indicated by:
• a flashing Alarm indicator;
• an acoustic buzzer.
When normal conditions are restored
(door closed), the alarm will stop. The
buzzer can also be switched off by
pressing any button.
3.7 COOLMATIC function
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the COOLMATIC function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
1. Press the Mode until the
The COOLMATIC indicator flashes.
2. Press the OK to confirm.
The COOLMATIC indicator is shown.
The COOLMATIC function shuts off
automatically after approximately 6
hours.
To switch off the function before its
automatic end, repeat the procedure.
D
corresponding icon appears.
The function switches off by
selecting a different fridge
set temperature.