Remote Control - Yamaha WXA-50 Owner's Manual

Remote control

a
b
c
d
e
z (power) key
1
Turns the unit's power to on/standby.
Input source selection keys
2
Selects the input source for playback.
(Bluetooth) Bluetooth input
NET* Network input
USB* USB jack
OPT OPT IN jack
AUX AUX IN jack
* In order to select content, the dedicated application
"MusicCast CONTROLLER" for mobile devices is
necessary.
Note
The selected input source is indicated by the status indicator on
the front panel (p.9).
Volume adjustment keys
3
Adjusts the volume.
+/- Adjusts the volume for playback.
Mutes the speaker output.
(Mute)
Note
To adjust the maximum volume, see "CONFIGURING
ADVANCED FEATURES" (p.28).
PRESET keys
4
Presets PC/NAS albums or songs, Internet radio stations
and streaming stations on the unit.
To register a song/station, press and hold any one of the
PRESET keys (1 to 6) for 3 seconds. After a song/station is
registered to a PRESET key, it can be played back by
simply pressing that key (p.19).
USB/NET operation keys
5
Controls playback when selecting USB or NET as the input
source.
Skips to the beginning of the song being played
f
back (press and hold to skip to the previous song).
Plays/pauses.
ad
Skips to the next song.
g
n
Operating by the remote control
Point the remote control at the remote control sensor on
the unit and remain within the operating range shown
below.
Within 6 m (20 ft)
30° 30°
8
En
n
Replacing the battery
1
While pushing the release tab in
direction "A", slide out the battery
holder in direction "B" as shown below.
2
Check the "+" of the battery and set it
on the battery holder.
3
Insert the battery holder in the correct
direction.
CR2025 type Lithium
battery