Panasonic DP-C406 Operating Instructions Manual page 6

11
Select "03 DNS" and select "Yes" to
use DNS Server, and then select
"OK".
1
12
Enter the Host Name, Domain Name,
and DNS Server address, and then
select "OK".
1 Select Host Name to enter a host name
using the Keyboard, and then select "OK".
(Up to 60 characters)
6
2
1 2
1 2
2 Select Domain Name to enter a domain
name using the Keyboard, and then select
OK. (Up to 50 characters)
3 Select IPv4, and then select "Input" to add
a DNS Server address using the Keypad.
(3 digits x 4)
• You can set IPv6 as needed. Select IPv6, and
then select "Input" to add a DNS Server address
using the Keypad. (4 digits × 8)
For details on IPv6, refer to the Document
Management System (Device Explorer and
Embedded Web Server) of provided CD-ROM.
• You can also select the settings below as
needed.
General Settings (Key Operator Mode)
50 User Auth. Domain
Network Settings -> 01 General -> 01 IPv4
04 WINS Server 1 IP
05 WINS Server 2 IP
06 Scope ID
07 IP Filter
08 IP Filter Mode
09 IP Filter Address
Network Settings -> 01 General -> 04 SNMP
03 Community Name (R)
04 Community Name (RW)
13
Press the Reset key.
14
Turn the Power Switch OFF, and then
back ON again.