Panasonic NC-DK1 Operating Instructions Manual page 21

Turn on the power switch.
3
(Press " ")
Max
1.4
1.0
0.6
During use, the power
indicator lights up.
When the water has boiled, the power
switch turns off automatically.
• The kettle takes around 3 minutes to boil.
(
Water temperature 23°C, room
temperature 23°C, water to max level
• To stop boiling before the
water has boiled, turn off
the power switch.
Note
• Immediately after the water has boiled,
do not force the kettle to continue heating
the water by keep pressing the power
switch. (It may cause malfunction.)
Empty-use prevention function
When the power switch is on without water, an empty-use prevention function works to
automatically turn off the power in order to prevent accidents and malfunction due to
overheating.
 Allow the body to cool sufficiently.
 Remove the body from the power base and fill the water.
 Place it on the power base and turn on the power switch again.
* If you boil the kettle without water, it may smell strange.
Start boiling the
water.
( )
Power indicator
lights up.
)
Remove from the power
4
base and pour.
 After use, pour out any remaining
water.
* Keep the lid closed when pouring
away the water.
Max
1.4
1.0
0.6
21