Making Ice Cubes - Panasonic NR-B30FW1 Operating Instructions Manual

Features and functions
Hygiene Active
Vitamin-Safe
Alarm Off
Child Lock

Making ice cubes

Open the freezer, pull out the upper drawer and take out the ice tray. Open the ice tray lid and fill water in the ice tray to the
water level line. Then close the lid and place back the ice tray.
When ice cubes are ready, pull out the upper drawer and take out the ice tray. Open the lid and slightly twist the ice tray by
holding its two sides, the ice cubes will drop into the ice tray. Then, put the ice box back into its place.
10
NR-B30FX&FG1.indb 10 NR-B30FX&FG1.indb 10
You can use this to operate the antibacterial function.
To activate: Press the Hygiene Active button and the Hygiene indicator will light up.
To deactivate: Press the Hygiene Active button. The Hygiene indicator will switch off.
Tips for use:
● Once you've pressed the Hygiene Active button, you may hear the deodorising fan running.
If you open the refrigerator door while the Hygiene Active function is on, the fan stops.
● When storing food with a strong odour, wrap it in cling film or put it in a sealed container.
Otherwise, even with the Hygiene Active function on, the odour may linger.
● Once you have pressed the Hygiene Active button, try not to open the fridge door.
The 'keep fresh' feature helps preserve the Vitamin C in fruit and vegetables, and is
activated by the blue and green LED lights.
To activate: Press the Vitamin-Safe button. The Vitamin indicator will light up, and blue
and green LED lights will flash at the same time.
To deactivate: Press the Vitamin-Safe button. The Vitamin indicator will switch off.
This lets you know when the refrigerator or freezer door isn't closed. It also tells you if the
refrigerator or freezer temperature is too high.
Door open time
After one minute
After three minutes
After five minutes
Temperature is too high
To activate: Press the Alarm/Child Lock button. The buzzer will stop.
Note: When the buzzer function starts, the temperature display will flash.
Use this mode to lock all buttons without the Alarm off function.
To activate: Press and hold the Alarm/Child Lock button for 3 seconds. The Lock indicator
will light up and all buttons are locked.
To deactivate: Press and hold the Alarm/Child Lock button for 3 seconds. The Lock
indicator will switch off and the lock is released.
Water level line
(continued)
Buzzer
Beep beep
Beep beep, beep beep
Beep continuously
Beep continuously
Ice box
1/22/2009 12:56:12 PM 1/22/2009 12:56:12 PM