CONTENTS OF PACKAGING AC1900 WI-FI ROUTER DIR-879 POWER ADAPTER 12V / 2A CAT5 ETHERNET CABLE CONNECTS THE ROUTER TO YOUR PC DURING SETUP WI-FI CONFIGURATION CARD Wi-Fi Configuration Note CONTAINS THE DEFAULT WI-FI INFORMATION If any of these items are missing from your packaging, contact your reseller.
Router If you are configuring the DIR-879 from a PC with a wired Ethernet connection, plug one end of an Ethernet cable into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer.
RouteR MoDe CoNFiGuRAtioN To set up and manage your DIR-879, you can use the free QRS Mobile app, or you can use the built-in web interface. To use as Access Point or Extender, please refer to the User Manual, available at http://dlink.com.
- Verify that your network cables are firmly attached. - Make sure you are connected the wireless network printed on the Wi-Fi Configuration Card. - If you are still having difficulty, reset the DIR-879 to the factory default settings as described in question 2 above.
SuPPoRt You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: D-Link Middle East - Dubai, U.A.E. Tel: 1300-700-100 Plot No. S31102, 24/7 Technical Support Jebel Ali Free Zone South, Web: http://www.dlink.com.au P.O.Box 18224, Dubai, U.A.E.