Error Message List - Panasonic BB-HNP11A Operating Instructions Manual

2.14 Error Message List

Message
Basic Setting
Enter "Camera Name".
Enter "Camera Address".
"Port" should be between 1 and
65535.
"Camera Name" should be 250
characters or less.
"Comment" should be 128
characters or less.
Image Settings
Specify Recorded Frequency and
Sound Recording cannot be
selected simultaneously. Either set
Recorded Frequency to [Not
Specify] or set the recording
settings to [Image Only].
Recording Capacity
Enter "Recording Capacity".
"Recording Capacity" should be
between 100 and 500000.
Cause and Remedy
• The Camera Name space was blank.
Follow the instruction message.
• The Camera Address space was blank.
Follow the instruction message.
• A number not between 1 and 65535 was
entered in the Port blank.
Follow the instruction message.
• The Camera Name was more than 250
characters.
Follow the instruction message.
• The Comment was more than 128 characters.
Follow the instruction message.
• Image settings are set to [Recorded
Frequency Specify], and [Audio and Image]
are selected simultaneously. Or if another tab
or OK is pressed in this state.
Follow the instruction message.
• The Recording Capacity space was blank.
Follow the instruction message.
• A number not between 100 and 50000 was
entered in the Recording Capacity blank.
Follow the instruction message.
Operating Instructions
75