Panasonic BM-ET200 Brochure & Specs page 3

MAJOR OPERATING CONTROLS
Front & Side View
1
2
10
9
8
3
4
7
6
5
11
Bottom View
12
Distance Indicator
1
Front Panel
2
3 Mirrors
4 Eye Image Capturing Cameras
Audio Volume Controller
5
Video Surveillance Camera (Option)
6
7 Speaker
Results Indicator
8
Tilt Handles
9
10 Live Indicator
Front Cover
11
High Speed Serial Interface
12
RECOMMENDED SMART CARD READERS AND WRITERS
Applicable products Manufacturer
Smart Card Writer HID Corporation Ltd.
RFIDeas, Inc.
Smart Card HID Corporation Ltd.
• In regard to details of the Smart Card Writer and the Smart card, refer to the
respective instruction manuals attached to merchandise.
• When a card writer is connected and a USB-RS-232C conversion connector is used,
the system may not operate normally.
• The USB connections are applicable to Windows
®
with Windows 2000.
PRODUCT CONFIGURATION
Iris Reader Interface Board
BM-ET200 BM-ETA201
(
NTSC: included
in the BM-ET200
)
PAL: optional
Video Surveillance Camera
BM-ETC202
(optional)
® ®
• BM-ES200A supports Microsoft Windows 2000 Professional, Microsoft
® ®
Microsoft Windows Vista
® ®
• BM-ES200 supports Microsoft Windows 2000 Professional and Microsoft
Trademarks and registered trademarks
– Private ID, and KnoWho are trademarks of Iridian Technologies, Inc., USA.
– iCLASS is a registered trademark of HID Corporation.
® ®
– Windows 2000 Professional, Windows XP Professional or Windows Vista
– All other trademarks are the property of their respective copyright holders.
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
– Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network.
DISTRIBUTED BY:
APPEARANCE
77(3-1/16") 203(8")
46
52
(1-13/16")
(2-1/16")
Unit : mm (inch)
Product / Product No.
RWK400 RW400
RFID1356i (USB and RS-232)
2001, 2011, 2021, 2031, 2041, 2051, 2061
This software supports the blank card only.
®
XP only. Operation is impossible
Administration Software
BM-ES200A
(5,000 User license included)
BM-ES200
(25 User license included)
User License Software
BM-EU31000
(for 1,000 Users)
BM-EU35000
(for 5,000 Users)
® ®
Windows XP Professional and
® ®
Windows XP
®
are registered trademarks of Microsoft Corporation in the USA and/or other countries.
BM-ET200 SPECIFICATIONS
General
Power source (*1) 12 V DC/24 V DC
Power consumption Max. 24 W
Ambient operating temperature 0 ºC to +40 ºC (32 ºF to 104 ºF)
Ambient operating humidity 30 % to 90 %
Dimensions 203 mm (W) x 190 mm (H) x 77 mm (D) (8" (W) x 7-1/2"(H) x 3-1/16"(D))
Weight 0.9 kg (1.98 lbs.) (this iris reader only)
Interface Wiegand, RS-485
Network 10Base-T/100Base-TX (Auto negotiation)
Network protocol TCP/IP
Available card reader for Iris on card system RWK400 (Manufactured by HID Corporation)
Input/Output
Iris Reader BM-ET200
Recognition start trigger input 0 V to 5 V, 24 mA max., Active low, Pulse width: 200 ms or more
Recognition result output1 (ACCEPT) make contact output, Normally Open, Pulse width: 0.1 s to 60 s, 24 V DC,
100 mA, ON-Resistance 6 Ω
Audio Output (Preamplifier) Stereo mini plug (ø3.5 mm)(10 kΩ, 100 mV [P-P])
High speed serial interface Numeric Key, External memory (*5)
Interface Board BM-ETA201 (NTSC: included in the BM-ET200 PAL: optional)
Dimensions 65 mm (W) x 76 mm (H) x 31 mm (D) (2-9/16" (W) x 3" (H) x 1-1/4" (D))
Alarm output1 (tamper detection) Open collector output, Normally Open, Active low, 24 V DC, 24 mA
Alarm output2 (power status) Open collector output, Normally Close (Low level), 24 V DC, 24 mA
Recognition result output2 (REJECT) Open collector output, Normally Open, Active low, Pulse width: 0.1 s to 60 s,
24 V DC, 24 mA
Buzzer input: 0 V to 5 V, 24 mA max., Active low, Pulse width: 200 ms or more
Time adjust input 0 V to 5 V, 24 mA max., Active low, Pulse width: 100 ms or more (*7)
Interface (card reader) Wiegand, RS-485 (Either can be selected.)
Wiegand power output (card reader) 5 V DC, 100 mA max.
Wiegand DATA0 input(card reader) 0 V to 5 V DC, 25 mA max., Active low
Wiegand DATA1 input (card reader) 0 V to 5 V DC, 25 mA max., Active low
Differential input: ± 0.2 V or more,
RS-485 (A), (B) (card reader)
Differential output: ± 2 V or more (When termination is ON) (*6)
Interface (access control panel) Wiegand, RS-485 (Either can be selected.)
Wiegand power input (access control panel) 5 V DC (No connection available)
Wiegand DATA0 output (access control panel) 0 V to 5 V DC, 25 mA max., Active low
Wiegand DATA1 output (access control panel) 0 V to 5 V DC, 25 mA max., Active low
Wiegand ACCEPT-LED input (access control panel) 0 V to 5 V, 24 mA max., Active low, Pulse width: 200 ms or more
Wiegand REJECT-LED input (access control panel) 0 V to 5 V, 24 mA max., Active low, Pulse width: 200 ms or more
RS-485 (A), (B) (access control panel) Differential input: ± 0.2 V or more,
Differential output: ± 2 V or more (When termination is ON) (*6)
Video Surveillance Camera BM-ETC202 (optional)
1 V [P-P] NTSC/PAL composite 75 Ω BNC connector
Video Output
Function
Iris recognition time Approx. 0.3 seconds (After iris image capturing until the recognition
result is output) (*2)
Approx. 5 seconds (Server certification. After iris image capturing until
the recognition result is output) (*3)
Eye image capturing range Approx. 30 cm to 40 cm (11-13/16" to 15-3/4") between the eyes and the mirror
Total number of users enrolled
Stand alone mode 50 users max.
Network mode Iris Reader BM-ET200: 5,000 users max.
Administration Software: 10,000 users max. (*4)
Voice guidance 14 languages supported (English, French, German, Spanish, Italian,
Turkish, Arabic, Chinese, Korean, Russian, Portuguese, Dutch,
Swedish, and Japanese)
Mute, Simple (recognition result), and Full (voice guidance and
recognition result) selectable
Distance indicator Lighting of the lamp indicates the proper distance between the user and the main body.
Live indicator Blinking, On, and Off selectable
Angular field view Horizontal: 115 º, Vertical: 85 º (Fixed)
(Video Surveillance Camera: BM-ETC202)
Security function Tamper detection switch, Iris data encryption
*1 The third-party external power-supply should meet
the following specifications, and must be a UL Listed
access control power limited device.
Output voltage Output current capacity
12 V DC ± 0.5 V 2 A (NTSC)/1.2 A (PAL) or more
24 V DC ± 0.5 V 1 A (NTSC)/0.6 A (PAL) or more
Rated ripple voltage/Ripple noise: 150 mV [P-P] or less
Overcurrent protection: Enabled (mandatory)
*2 The recognition time may differ depending on
recognition condition.
*3 The recognition time may differ depending on capturing
conditions, network conditions, or the total number of
enrolled users.
*4 User Licence Software BM-EU30000 Series (option)
is required.
*5 Refer to the dealer for available external devices.
*6 Our exclusive protocol is employed.
*7 Refer to the dealer for available external devices.
• All TV pictures are simulated.
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
http://panasonic.net/security/
Printed in Japan (2A-038L)