Philips Pronto User Manual page 20

Customizing Pronto
Note
6 Tap the button you want to learn.
A Learning indication appears in the top center of the touch screen.
7 Press the key on the other remote control within 5 seconds.
If learning succeeded, you will get an OK message.
If learning failed, you will get a Failure message.
See "Pronto will not learn commands" on page 41 for more information.
8 Select other buttons on Pronto you want to learn.
9 Press the left hard button
Learn Tool.
Learning a Device Action
1 Press the left hard button
3 seconds.
The Tools menu appears.
2 Tap Learn in the Tools Menu.
The 'Learn Tool' screen appears.
3 Tap
The Device Overview appears.
4 Position Pronto and the remote control as illustrated above.
Note
5 Tap the Device for which you want to learn a Device Action.
A Learning indication appears in the top center of the touch screen.
6 Press the key on the other remote control.
If learning succeeded, you will get an OK message.
If learning failed, you will get a Failure message.
7 Select other Devices on the Device Overview you want to learn.
8 Press the left hard button
Learn Tool.
User Guide
Make sure that you aim Pronto's learning eye at the remote control's
IR window.
The distance between Pronto and the remote control should be between
4 and 8 inches (10 and 20 cm).
Make sure that you aim Pronto's learning eye at the remote control's
IR window.
The distance between Pronto and the remote control should be between
4 and 8 inches (10 and 20 cm).
20
below the touch screen to exit
below the touch screen for
.
below the touch screen to exit