Web Browser Configuration - D-Link AC5300 Quick Install Manual

Plug the power adapter into your router and connect to an available power
6
outlet or surge protector. If the Power LED does not light up, press the
Power button on the back of the router.
Modem
* If you are connecting wirelessly, you may now connect to the router using the supplied
Wi-Fi Configuration Card for the Wi-Fi network name (SSID) and Wi-Fi password.
After the router has powered up, verify that the Power (white) and Internet
7
(orange or white) LEDs are both lit. Proceed with router configuration.
Configuration
There are two ways to configure your router:
A. Web Browser - Use a web browser from your computer.
B. QRS Mobile app - Use a mobile device with the D-Link QRS Mobile app.
Refer to the QRS Mobile Setup section for more information.
A. Web Browser Configuration
Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari)
1
and enter http://dlinkrouter.local./ or enter the IP address of the router
(192.168.0.1).
6
1 2 3
DIR-895L
USB 3.0 USB2.0 RESET WPS 1 2 3 4 Ethernet
USB
T
POWER
12V 2A
4 INTERNET 12V --1.5A POWER WPS
2A
Router
Extender
POWER DC IN
Computer
Wireless
Computer*