Change The Working Mode - Philips AC4080 User Manual

Note
•
After the appliance is switched off by the on/
, if the plug is still in the power
off button
socket, the appliance will resume working
based on the last settings when it is
switched on again.

Change the working mode

Besides operating under air purification
combined with humidification, the appliance can
also work under air purification only mode.
1
After the appliance is switched on,
press once.
» The HUMIDIFY and humidity level
indicators go out.
» The humidification function is
deactivated. The appliance works under
air purification only mode.
2
Press again to activate the humidification
function.
Note
•
In air purification only mode, the humidification
button does not respond.
•
The appliance cannot work under humidification
only mode.
12 EN
Set the sensitivity of the air
quality sensor
This appliance allows you to adjust the
sensitivity of the air quality sensor. There are
three sensitivity levels:
• extra sensitive (default setting)
• sensitive
• standard
You can adjust the sensitivity of the air quality
sensor in the following way:
Note
•
When the appliance is set to a higher sensitivity,
the purifier becomes more allergic to the
pollutants in the air. When the purifier is in
AUTO mode, it is more likely to choose a higher
fan speed than the standard mode. The air
quality sensor selects the appropriate color of
the air quality light in accordance with the higher
sensitivity.
1
Unplug the appliance.
2
After a short while, put the plug in the wall
socket again.