Dwz-B30Gb - Sony DWZ-M50 Operating Instructions Manual

Caution
Do not set the selector to the LINE position
while outputting audio to an audio mixer or
similar device. Inputting audio at excessive
levels may distort audio or damage the
playback/recording device.
f Cable clamp
Secures the cable of the supplied AC
adapter.
g DC IN 12V (power input) connector
Connect the supplied AC adapter here.

DWZ-B30GB

Body-pack transmitter
(transmitter: ZTX-B01)
a Antenna cover
Contains the antenna.
Caution
Do not squeeze the antenna cover. Doing so
will weaken the signal that is transmitted,
decreasing the transmission range.
10 Parts Identification
b BATT (remaining battery) indicator
Indicates the remaining battery charge
when the unit is turned on.
Indicator Status
Lit (green) Good
Lit (red) Almost dead
The remaining battery indication only
appears when alkaline dry cell batteries are
being used.
c Button lock switch
Locks the POWER/MUTING button and
the CHANNEL SELECT button. This
prevents unintentional operations, such as
accidentally turning the power off. The
factory default setting is UNLOCK.
LOCK: Locks the buttons to disable their
operation.
UNLOCK: Releases the lock to enable
button operation.
Caution
You cannot turn on the unit while this
switch is set to the LOCK position, as even
the power button is disabled. Set the switch
to the UNLOCK position to perform
operations.
d Audio input connector
Connect a guitar or similar instrument here
using the supplied guitar cable.
e AUDIO/MUTING indicator
Indicates the input level of the audio signal
and the status of the muting function.
Indicator Status
Lit (green) Audio input present
Lit (red) Excessive audio
input
Off Audio input weak or
nonexistent