Rear Panel - D-Link ShareCenter DNS-340L User Manual

Section 1 - Product Overview
Power Receptor
USB Ports
COMPONENT
Power Receptor
Cooling Fan/Outlet
USB Port
Gigabit Ethernet Ports
Reset Button
D-Link ShareCenter DNS-340L User Manual
DESCRIPTION
Connect the supplied power cord to the receptor.
The cooling fan cools the hard drives and features speed control. When the unit is first powered on, the fans
rotate at a low speed and later rotate at a high speed when the temperature inside the unit rises above 49 °C. Do
not cover or obstruct this outlet.
Two USB 2.0 (type A) connector. The USB Host port is for Printers, USB storage, or USB UPS monitoring.
Use the Gigabit Ethernet ports to connect the ShareCenter to your local network. The port is equipped with 2 LEDs.
The LED on the left will illuminate solid green for a good connection and will blink during data transmission. If this
LED is off, check the connection/cable to the device you are connecting to. The LED on the right will light solid for a
Gigabit connection and will remain off when connected to a 10/100 Mbps device.
Press and hold this button for more than 5 seconds to reset it to its factory defaults.

Rear Panel

Cooling Fan/Outlet
Gigabit Ethernet Port
Reset Button
9