Canon POWERSHOT PRO1 User Manual page 154

Connecting the Camera to a Computer Via the USB Cable (continued)
2
Connect the supplied interface cable to the
computer's USB port and the camera's DIGITAL
terminal.
You do not need to turn off the computer or camera when making
a USB connection.
Please refer to your computer manual for information regarding the
location of the USB port.
The camera's LCD monitor (or viewfinder) will blank out when the
connection to the computer is complete and the power/mode
indicator will light yellow.
For information about what to do after making the connection,
please refer the Canon Digital Camera Software Starter
Guide Disk.
150
Downloaded From camera-usermanual.com Canon Manuals
USB port
Interface cable
To disconnect the cable from the camera: Hold
the cable connector firmly at both sides and pull
it straight out.
Interface cable
DIGITAL terminal
1. Open the terminal cover with
your fingernail.
2. Hold the USB connector so
the side is up, then insert
it into the DIGITAL terminal
securely.