QuickSpecs
Overview
1. Two hot-plug small form factor (SFF) SAS/SATA/SSD bays
2. Power on/standby button
3. UID, health, and network adapter LEDs
4. 32 RDIMM slots supporting up to 1.0TB of DDR3-1333
memory (operating up to 1066 MHz)
5. One USB 2.0 port, one MicroSD high capacity (SDHC) port,
and one TPM 1.2 connector
6. Three PCIe Gen2 I/O expansion mezzanine slots
What's New
What's New
What's New
What's New
Support for 3G SATA Hot Plug Enterprise Mainstream Solid State Drives to 800GB per server (2x 400GB)
Support for 6G SAS Hot Plug Enterprise Performance Solid State Drives to 800GB per server (2x 400GB)
Support for 6G SAS Hot Plug Enterprise Mainstream Solid State Drives to 1.6TB per server (2x 800GB)
At A Glance
At A Glance
At A Glance
At A Glance
This document covers the HP ProLiant BL620c G7 server blade only. For more information on the HP BladeSystem c-Class Enclosure
and HP BladeSystem c-Class Interconnects, please see the following:
HP ProLiant BL620c Generation 7 (G7) Server Blade
HP ProLiant BL620c Generation 7 (G7) Server Blade
HP ProLiant BL620c Generation 7 (G7) Server Blade
HP ProLiant BL620c Generation 7 (G7) Server Blade
DA - 13747
Worldwide — Version 16 — September 26, 2011
HP ProLiant BL620c Generation 7 (G7) Server Blade
HP ProLiant BL620c Generation 7 (G7) Server Blade
HP ProLiant BL620c Generation 7 (G7) Server Blade
HP ProLiant BL620c Generation 7 (G7) Server Blade
7.
Four NC553i 10Gb FlexFabric adapter ports
8.
iLO 3 Management adapter port
9.
HP P410i Smart Array flash cache connector
10. One or two Intel® Xeon® 6500 or 7500 Series processors
up to eight-cores each (below the hard drives)
11. Server release lever
Page 1