Panasonic CF-07 Series Operating Instructions Manual page 42

Hard Disk Data Erase Utility
Press F10 .
At the confirmation message, select [Yes] and press Enter .
The computer will restart, and this screen should appear.
---------------------------------------------------------------------
Select a number
---------------------------------------------------------------------
1. [ Recovery
2. [ Erase HDD ] Erase the whole data on HDD for security.
0. [ Cancel
---------------------------------------------------------------------
Select [2. [Erase HDD]].
At the confirmation message, press Y .
At the start menu, press Enter .
The approximate time required for erasing data will be displayed.
Press Space .
At the confirmation message, press Enter . The operation of erasing the hard disk
starts.
(If necessary, the "hard disk data erase" operation can be cancelled after it has begun
by pressing Ctrl + C .
If the operation is cancelled before being completed, a part of data will not be erased.)
After the operation is complete:
Under normal conditions, the message [Hard disk data has been deleted.] will be displayed.
If a problem occurred during the operation, an error message will be displayed.
Remove the recovery CD, then turn off the computer by pressing and holding the power
switch for more than four seconds.
42
] Reinstall Windows.
] Cancel.