Cleaning The Machine - Mitsubishi Electric Fresh Master GUF-50RDH4 Operating Instructions Manual

4. Cleaning the machine

(Lossnay core: clean at least once every 2 years)
Caution:
- Before you start cleaning, stop operation and turn OFF the
power supply. Remember that the fan is rotating inside at
high speed, posing a serious risk of injury.
- Always wear gloves when cleaning the unit.
- Maintenance work should only be performed by someone
who has received the necessary training.
How to remove each part
1. Maintenance cover
(1) Remove the screw (one piece) left side of the Maintenance cover.
(2) Pull back the hinges, open the Maintenance cover and disengage
the cover from the catches.
Catch
Screw
Caution
- The Maintenance cover must be removed.
right side of the Lossnay cores (2 units).
3. Lossnay cores
Take hold of the handle and draw the Lossnay cores out from the
main unit (2 Lossnay cores)
Handle
Maintenance cover
(Optional part)
Lossnay core
Main unit
Filter stopper
Caution:
How to clean
Use a vacuum cleaner to remove light dust. To remove stubborn
dirt wash in a mild solution of detergent and lukewarm water. (under
Vacuum cleaner
Caution:
never wash them by rubbing them.
2. Lossnay cores
surfaces of the Lossnay cores.
Do NOT wash in water.
Vacuum cleaner
(with brush attachment)
Caution:
- Do not use the hard nozzle of the vacuum cleaner.
If may damage the exposed surfaces of the Lossnay cores.
- Under no circumstances should the Lossnay cores be
washed in water.
Filter guide
Lossnay core
10