Related Manuals for LG 19CNT42K
Summary of Contents for LG 19CNT42K
- Page 1 OWNER'S MANUAL CLOUD MONITOR (LED MONITOR) Please read the safety information carefully before using the product. CLOUD Monitor(LED Monitor) Model 19CNT42K www.lg.com...
-
Page 2: Table Of Contents
Table of Contents TABLE OF CONTENTS ASSEMBLING AND PRODUCT SPECIFICATION PREPARING Preset Mode Unpacking Power Indicator Parts and buttons Lifting and moving the Monitor PROPER POSTURE Setting Up the Monitor set Proper posture for using the monitor - Attaching the Stand Base - Mounting on a table USING CITRIX CLOUD - Adjusting the angle... -
Page 3: Assembling And Preparing
Stand Base (This cable is not included in all counties) CAUTION Only use an approved LG power adapter. Damage caused by other power adapters is not covered by warranty. NOTE Note that the components may look different from those shown here. -
Page 4: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons Input Connectors (See p.15 ) Power Indicator LED On : Power is on LED Off: Power is off (Power Button) Front Side Buttons Input Connectors (See p.12 to 15) -
Page 5: Lifting And Moving The Monitor
ASSEMBLING AND PREPARING Lifting and moving the Setting Up the Monitor set Monitor Attaching the Stand Base Please heed the following information when moving the monitor. Place the monitor's screen face down. CAUTION CAUTION To protect the screen from scratches, cover Avoid touching the screen at all times, as this the surface with a soft cloth. -
Page 6: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a table Adjusting the angle Lift the monitor and place it on the table in an Place the monitor mounted on the stand base upright position. in an upright position. Install at least 10 cm away from the wall to ensure sufficient ventilation. -
Page 7: Adjusting The Stand Height
ASSEMBLING AND PREPARING Adjusting the stand height Using the Kensington locking device Place the monitor mounted on the stand base The connector for the Kensington lock is located in an upright position. on the rear of the monitor. For more information on installation and usage, Remove the tape attached at the bottom rear refer to the Kensington lock user manual or visit of the stand body, then pull out the locking... -
Page 8: Detaching The Stand Base
ASSEMBLING AND PREPARING Detaching the stand base Detaching the stand body Place the monitor's screen face down. Place the monitor's screen face down. To protect the screen from scratches, cover the To protect the screen from scratches, cover the surface with a soft cloth. surface with a soft cloth. -
Page 9: Swivel Stand
ASSEMBLING AND PREPARING Swivel stand Be careful with the cables when rotating the screen. Image shown may differ from your Monitor set. Swivel 90 degrees and adjust the angle of the Monitor set to suit your view. Using the Pivot function The pivot function allows you to rotate the screen 90 degrees clockwise. -
Page 10: Installing The Wall Mount Plate
Mounting on a wall This monitor has a VESA compatible mount on the Install the monitor at least 10 cm away from the back. Most mounts will require an LG mounting wall and leave about 10 cm of space at each side plate. - Page 11 Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Please use a LG wall mounting bracket when using a VESA mount. For more information, contact your local retail store or a qualified installer.
-
Page 12: Using The Monitor Set
USING THE MONITOR SET USING THE MONITOR SET Connecting Input Signal Cable NOTE This monitor supports the *Plug and Play Apple Adapter feature. An adapter may be needed for Apple *Plug and Play: A feature that allows you to add a device to your computer, without having computers. -
Page 13: Dvi Connection
USING THE MONITOR SET DVI connection CAUTION Transfers digital video signals from the Cloud Mon- Connect the input signal itor to an extended monitor. cable and tighten in the Connect the Cloud Monitor to an extended monitor direction of the arrow. To using a DVI cable. -
Page 14: Connecting Lan/Peripherals
USING THE MONITOR SET Connecting LAN/Peripherals NOTE LAN connection The LAN cable is sold separately. The following LAN cable type can be used: Connect the router or switch to the monitor using a Standard: IEEE 802.3 ETHERNET LAN cable as illustrated below. If a device is connected into the earphone out port via a LAN cable, you can adjust the volume with the volume icon on PC taskbar. -
Page 15: Peripheral Device Connection
USING THE MONITOR SET Peripheral device connection NOTE Connect peripheral devices to the monitor using Peripheral devices are sold separately. USB, microphone and headphone ports. The USB ports on the left and bottom of the monitor can be used to connect the key- board, mouse, and other USB devices. -
Page 16: Self Image Adjustment
USING THE MONITOR SET Self Image Adjustment Press the power button on the front to turn on the monitor. When powered on, the "Self Image Adjustment" function will run automatically (only available for analog [D-SUB input] signals). NOTE What is "Self Image Adjustment"? This func- tion runs when the monitor is connected for the first time and performs automatic image adjustment for each signal (only available for... -
Page 17: Customizing Settings
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Press the desired button on the bottom of the Monitor set. Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. -
Page 18: Customizing Settings
CUSTOMIZING SETTINGS Customizing Settings Menu Settings Press MENU button on the bottom of the Monitor set to display the MENU OSD. Set the options by pressing the ◄ or ► or ▼ buttons. Select the "NEXT MENU" button to enter the more option settings. -
Page 19: Picture
CUSTOMIZING SETTINGS PICTURE Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more option settings. Enter to PICTURE by pressing the ▼ button. Set the options by pressing the ◄ or ► buttons. Select EXIT to leave the OSD menu. -
Page 20: Color
CUSTOMIZING SETTINGS COLOR Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more option settings. Select COLOR by pressing the ► button. Enter to COLOR by pressing the ▼ button. Set the options by pressing the ◄... -
Page 21: Display
CUSTOMIZING SETTINGS DISPLAY Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more option settings. Select DISPLAY by pressing the ► button. Enter to DISPLAY by pressing the ▼ button. Set the options by pressing the ◄... -
Page 22: Others
CUSTOMIZING SETTINGS OTHERS Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more option settings. Select OTHERS by pressing the ► button. Enter to OTHERS by pressing the ▼ button. Set the options by pressing the ◄... -
Page 23: Volume
CUSTOMIZING SETTINGS VOLUME Press the VOL button at the bottom of the monitor to display the VOL OSD menu. Press the ◄ or ► button to adjust the volume. Press the button to enable or disable Mute. Select EXIT to leave the OSD menu. Each option is explained below. -
Page 24: Troubleshooting
Troubleshooting TROUBLESHOOTING Nothing is displayed on the screen Is the monitor's power cord plugged in? y Check if the power cord is correctly plugged in to the outlet. Is the power indicator on? y Check the power indicator. y Adjust the brightness and the contrast. Is the power indicator displaying as red? y If the monitor is in power saving mode, move the mouse or press any... - Page 25 Troubleshooting The image is displayed abnormally. Does the display area appear un- Pressing the AUTO button will automatically optimize the screen to the current centered? display mode. Does the screen exhibit vertical Pressing the AUTO button will automatically optimize the screen to the current lines? display mode.
-
Page 26: Product Specification
Product Specification PRODUCT SPECIFICATION 19CNT42K LCD Screen Type 48.1 cm (19 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 48.1 cm Pixel Pitch 0.2835 mm x 0.2835 mm Resolution Maximum Resolution 1440 x 900 @ 60 Hz... -
Page 27: Preset Mode
Product Specification Preset Mode 19CNT42K Display Modes Horizontal Vertical Polarity (H/V) Remark (Resolution) Frequency (kHz) Frequency (Hz) 720 x 400 31.468 70.08 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 1440 x 900 55.935 59.888... -
Page 28: Proper Posture
Proper Posture PROPER POSTURE Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. Using the monitor for a prolonged period of time can cause eye fatigue. Take a 10-minute break every hour. -
Page 29: Using Citrix Cloud Monitor
USING CITRIX CLOUD MONITOR USING CITRIX CLOUD MONITOR Login screen Power Button This screen is displayed when power is turned on. Click the Power button to turn the system off or restart it in the login screen. Login Window Enter a user name, password and domain to ac- cess the VDI server. -
Page 30: Settings Button
USING CITRIX CLOUD MONITOR Restart Menu Language Select the Restart menu and click the OK button in Set a language to use on the network monitor the Restart pop-up to restart the system. home screen. After setting the language, click the 'OK' button. - Page 31 USING CITRIX CLOUD MONITOR Wireless setting (support planned to begin Wired connection setting in 2013) Ethernet speed setting: Set the network speed. The AP list for wireless network connection is You can select Auto-Detect, 10Mbps, displayed. Click the Refresh button to update 100Mbps or 1000Mbps.
- Page 32 USING CITRIX CLOUD MONITOR Server Set Citrix VDI server and eZ-CMS server address. eZ-CMS is a cloud monitor management software provided by LG Electronics. VDI server setting Enter a VDI server address to access. Connect Automatically: This option connects an IP automatically if it is disconnected.
- Page 33 Primary display setting nect to. Resolution: Select the resolution of a moni- tor. 19CNT42K: The network monitor supports 2 resolutions including Auto, 1440x900, 1024x768. When it is set to Auto, the monitor is auto- matically adjusted to the optimal resolution.
- Page 34 USING CITRIX CLOUD MONITOR Secondary display setting Volume Resolution: Select the resolution of a moni- You can adjust the system volume and mike vol- tor. ume. If you select the Mute checkbox, the volume Among the resolutions supported in the DVI control bar is disabled.
-
Page 35: Information Button
Software information: Firmware version, soft- ware file name and publisher information Wake on LAN: Status of Wake on LAN NOTE Wake on LAN can only be set in the LGMC. eZ-CMS is a cloud management software applica- tion provided by LG Electronics. - Page 36 USING CITRIX CLOUD MONITOR Network Tab Ping Tab Display network related information. By pinging, you check the network connection to a specific IP or host from a local client and also local Network Information: VDI/eZ-CMS server IP network status. address information Wired Connection: IP address and MAC ad- NOTE dress of a wired network...
- Page 37 Responsible Party: LG Electronics Inc. license terms, warranty disclaimers and copyright notices are available for download. Address : 1000 Sylvan Ave. Englewood Cliffs LG Electronics will also provide open source NJ 07632 U.S.A TEL: 201-266-2534 code to you on CD-ROM for a charge covering...