Summary of Contents for HP ProLiant DL385p Generation 8
Page 1
Video connector What's New HP is introducing a new line of AMD Opteron™ 6300 Series processors available on the DL385p Gen8 servers. Enhancing the price/performance equation from HP and AMD, the Opteron 6300 Series offers increased performance and efficiency over current solutions that maximize IT operations and output.
QuickSpecs HP ProLiant DL385p Generation 8 (Gen8) Standard Features NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor Sixteen-Core Processors One of the following AMD Opteron™ 6386SE (2.8GHz/16-core/16MB/140W TDP) Processor depending on Model AMD Opteron™...
Page 3
(RDIMM) NOTE: Requires 2nd processor installed NOTE: HP memory from previous generation servers may not provide the same performance with the HP ProLiant DL385p Gen8 Servers as HP SmartMemory will. NOTE: To realize the performance memory capabilities listed in this document, HP SmartMemory is required.
Page 4
Standard Features Network Controller HP ProLiant Gen8 servers offer a new networking technology - FlexibleLOM. The HP ProLiant DL385p Gen8 server offers the customer the choice of 1 Gigabit and/or 10 Gigabit networking solutions. For additional One of the following details see the Networking Section of this document.
Page 5
HP ProLiant DL385p Generation 8 (Gen8) Standard Features HP Server ROM HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This signature is verified before the flash process starts, reducing accidental programming and preventing malicious efforts to corrupt system ROM.
Page 6
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard drive blanks, they can order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HP LFF Gen8 Hard Drive Blank Kit. These part numbers for single HDD blanks below are also provided should the customer require replacement HDD blanks for their server.
Page 7
All Pre-configured Models servers ship with a high voltage server to PDU power cord. NOTE: HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13 power cord that connects to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to power distribution units (PDUs) in data center racks and now ship standard with a PDU 6-foot C-14 to C13 power cord (A0K02A).
Servers VMware Citrix XenServer NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page: http://www.hp.com/support/DL385pGen8...
Page 9
HP iLO Management Engine comes standard on all HP ProLiant Gen8 servers. The HP iLO Management Engine portfolio includes: HP iLO: The HP iLO (Integrated Lights-Out) management processor is...
Page 10
BladeSystem enclosure components (Onboard Administrator and Virtual Connect). This testing ensures the highest quality as well as providing the input for HP SUM to deploy updates taking into account all interdepencies, when determining the correct updates and order of update deployment.
Standard Features Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Lights-Out functionality ships standard across all HP ProLiant Gen8 rack, tower and blade servers. The HP iLO can be accessed from any location via a web browser and works hand- in-hand with HP Systems Insight Manager, Insight Control, and HP Matrix Operating Environment, helping customers unleash the value of the ProLiant platform and deliver the highest possible quality of IT service to the business.
Page 13
HP HPC Linux Value Pack HP Insight Online HP Insight Online is a new addition to the HP Support Center for one stop, secure access to product and HP support information personalized to your IT environment. Insight Online can automatically display devices remotely monitored by HP Insight Remote Support.
Page 14
3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require "custom" rack configuration or configuration for products not available in SCE, please contact HP's Customer Business Center or an Authorized Partner for assistance.
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.
Page 16
Provides problem resolution support across the stack of HW, firmware, and HP and 3rd party SW. In case the issue is with 3rd party SW, HP does known issue resolution. If HP cannot solve the issue, it will contact the third-party vendor and create a problem incident on your behalf.
Page 17
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating manual or the technical data sheet are not eligible for the defective media retention service feature option.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard drive blanks, they can order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HP LFF Gen8 Hard Drive Blank Kit.
Page 19
Form Factor Rack (2U), HP Ball Bearing Rail Kit /Cable Management Arm standard NOTE: The HP 1U Gen8 Cable Management Arm is not available when using Friction Rails. To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (p/n 695539-001).
Page 20
Form Factor Rack (2U), HP Ball Bearing Rail Kit /Cable Management Arm standard NOTE: The HP 2U Gen8 Cable Management Arm is not available when using Friction Rails. To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (p/n 695539-001).
Page 21
Form Factor Rack (2U), HP Ball Bearing Rail Kit /Cable Management Arm standard NOTE: The HP 1U Gen8 Cable Management Arm is not available when using Friction Rails. To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (p/n 695539-001).
Page 22
Form Factor Rack (2U), HP Ball Bearing Rail Kit /Cable Management Arm standard NOTE: The HP 1U Gen8 Cable Management Arm is not available when using Friction Rails. To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (p/n 695539-001).
Page 23
Form Factor Rack (2U), HP Ball Bearing Rail Kit /Cable Management Arm standard NOTE: The HP 2U Gen8 Cable Management Arm is not available when using Friction Rails. To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (p/n 695539-001).
8 SFF SAS/SATA HDD Bays Optical Drive Bay None Included PCI-Express Slots 3 PCIe slots Power Supply (2) HP 460W CS Platinum Plus Hot Plug Power Supplies (94% Efficient) Fans (4) (N+1 redundancy standard) Management HP iLO Management Engine (standard) Form Factor...
Page 25
8 SFF SAS/SATA HDD Bays Optical Drive Bay None Included PCI-Express Slots 6 PCIe slots Power Supply (2) HP 460W CS Platinum Plus Hot Plug Power Supplies (94% Efficient) Fans (6) (N+1 redundancy standard) Management HP iLO Management Engine (standard) Form Factor...
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.
Page 27
NO SID-Systems Insight Display Included 24 DIMM slots for RDIMM, LRDIMM, and UDIMM memory installation 1 FlexibleLOM connector (see Step2: HP Flexible NIC section below for NIC choices to populate the embedded connector) Smart Array P420i Controller w/ Zero Memory (ZM) I/O slots - 3 Slots come standard: Slot 1 - FL/FH x8 PCIe 2.0 (x16 connector)
Page 28
703962-L21 HP DL385p Gen8 AMD Opteron™ 6204 (3.3GHz/4-core/16MB/115W) FIO Processor Kit 677551-L21 HP Memory NOTE: To realize the performance memory capabilities listed in this document, HP SmartMemory is recommended. For additional information, please see the HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html...
Page 29
Mixing Gold, Platinum, and Platinum Plus certified power supplies is not supported. NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration.
Page 30
NOTE: HP 2U Ball Bearing Rail Kits provide full serviceability of the server while in the Rack and include a CMA. HP 2U Friction Rail Kits ARE NOT serviceable in the Rack and must be removed from the rack and do not include CMA.
Page 31
QuickSpecs HP ProLiant DL385p Generation 8 (Gen8) Configuration Information - Factory Integrated Models Step 4: Choose Additional Options for Factory Integration NOTE: For additional options, please refer to the "Core Options and Additional Options" section below. DA - 14329 North America — Version 11 — December 4, 2012...
NOTE: Some options may not be integrated at the factory. Contact your local sales representative for additional information. HP Unique Options HP DL380/DL385 Gen8 8 Small Form Factor Hard Drive Backplane Cage Kit 662883-B21 NOTE: With upgrade of 8SFF Cage/Bkpln, there is no Optical Drive support.
Page 33
Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HP Qualified Hard Drives and Solid State Drives. These new carriers DA - 14329 North America — Version 11 — December 4, 2012...
Page 34
QuickSpecs for details. SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive 652589-B21 HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive 652583-B21 HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive...
Page 35
QuickSpecs HP ProLiant DL385p Generation 8 (Gen8) Core Options HP 400GB 6G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty 690827-B21 Solid State Drive HP 200GB 6G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty 690825-B21 Solid State Drive 6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives...
Page 36
NOTE: FLR Indicates new HP FlexibleLOM Adapter series. NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/13078_na/13078_na.html HP I/O Expansion Options HP DL385p Gen8 x16 2x8 PCI-E Riser Kit 653214-B21 NOTE: 2nd Riser Cage requires 2nd Processor. DA - 14329 North America — Version 11 — December 4, 2012...
Page 37
Mixing Gold, Platinum, and Platinum Plus certified power supplies is not supported. NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration.
HP ProLiant DL385p Generation 8 (Gen8) Additional Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
Page 39
NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12612_na/12612_na.html HP HPC Linux Value Pack HP High Performance Computing Linux Value Pack 1 Processor Flexible License for TC293B ProLiant Servers NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key.
Page 40
HP 785GB Multi Level Cell G2 PCIe ioDrive2 for ProLiant Servers 673644-B21 HP 1205GB Multi Level Cell G2 PCIe ioDrive2 for ProLiant Servers 673646-B21 HP 2410GB Multi Level Cell G2 PCIe ioDrive2 Duo for ProLiant Servers 673648-B21 First Generation Accelerators HP 160GB Single Level Cell PCIe ioDrive for ProLiant Servers...
Page 41
631681-B21 HP 512MB P-series Smart Array Flash Backed Write Cache 661069-B21 HP Smart Array Advanced Pack 2.0 No Media 1 Server 1yr 24x7 Support Software BC377A HP Smart Array Advanced Pack 2.0 No Media Electronic Lic 1yr 24x7 Support Software...
Page 42
HP LTO-4 Ultrium 1760 SCSI External Tape Drive EH922B HP LTO-5 Ultrium 3000 SAS External Tape Drive EH958B HP StoreEver LTO-6 Ultrium 6250 Tape Drive in 1U Rack-mount Kit C0L99A HP StoreEver LTO-6 Ultrium 6650 Internal Tape Drive EH963A HP StoreEver LTO-6 Ultrium 6650 External Tape Drive...
Page 43
NOTE: For additional information on sizing your server, please reference: http://www.upssizer.com. NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units.
Page 44
HP ProLiant DL385p Generation 8 (Gen8) Additional Options NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units.
Page 45
NOTE: HP 2U Ball Bearing Rail Kits provide full serviceability of the server while in the Rack and include a CMA. HP 2U Friction Rail Kits ARE NOT serviceable in the Rack and must be removed from the rack and do not include CMA.
Page 46
NOTE: HP 2U Ball Bearing Rail Kits provide full serviceability of the server while in the Rack and include a CMA. HP 2U Friction Rail Kits ARE NOT serviceable in the Rack and must be removed from the rack and do not include CMA.
Page 47
HP 3yr 6hrCallToRepair 24x7w/Defective Media Retention DL38x(p) w/Insight Control U3N32E Proactive Care SVC HP 3 year 6 hour Call To Repair 24x7 w/DefectiveMedia Retention ProLiant DL38x(p) U2Z59E Proactive Care SVC HP 3 year Next business day ProLiant DL38x(p) Collaborative Support...
Page 48
The maximum memory capacity is a function of the memory type and number of installed processors. HP memory from previous generation servers is not qualified on the DL385p Gen8 Server. Certain HP SmartMemory features such as memory authentication and enhanced performance may not be supported.
Page 50
QuickSpecs HP ProLiant DL385p Generation 8 (Gen8) Memory 24 DIMM SLOTS (12 per CPU node) slot # population order slot # population order Chnl 1 Chnl 1 Chnl 2 Chnl 2 CPU1 CPU2 Chnl 3 Chnl 3 Chnl 4 Chnl 4 NOTE: Capacity references are rounded to the common Gigabyte values.
Page 51
HP ProLiant DL385p Generation 8 (Gen8) Memory Following are memory options available from HP: HP Memory NOTE: To realize the performance memory capabilities listed in this document, HP SmartMemory is recommended. For additional information, please see the HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html...
Page 52
QuickSpecs HP ProLiant DL385p Generation 8 (Gen8) Storage Eight SFF SAS hot plug drive bays 1-8, Sixteen SFF SAS hot plug drive bays. Built-In Smart Array manages first 8 drives. Requires 2nd Smart Array Controller for second option of 8 drives.
QuickSpecs HP ProLiant DL385p Generation 8 (Gen8) Technical Specifications System Unit Dimensions (H x W x D) SFF Drives: 3.44 x 17.54 x 27.50 in (8.73 x 44.55 x 69.85 cm) (with bezel) LFF Drives: 3.44 x 17.54 x 29.50 in (8.73 x 44.55 x 74.93 cm)
Page 54
QuickSpecs HP ProLiant DL385p Generation 8 (Gen8) Technical Specifications For 460 W Power Supply: 460 W (at 100 to 120 VAC), 460 W (at 200 to 240 VAC) Maximum Peak Power For 1200 W Power Supply: 800 W (at 100 VAC),...
Page 55
QuickSpecs HP ProLiant DL385p Generation 8 (Gen8) Technical Specifications LWAd 5.5 B LpAm 37 dBA Emissions Classification FCC Rating Class A (EMC) Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC...
Page 57
AMD, the AMD Arrow logo, AMD Opteron™, and combinations thereof, are trademarks of Advanced Micro Devices, Inc. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.