Problem
flashes in the display
alternating with .
After switching the wok
on, appears in the dis-
play for a few seconds.
After switching on the
wok appears in the
display for a few
seconds.
The wok does not heat
up.
Cause and remedy
The wok pan has been taken off the wok for more
than 3 minutes.
Replace the wok pan or switch the wok off.
The overheating protection mechanism has been ac-
tivated.
See "Overheating protection".
The system lock has been activated.
You need to deactivate the system lock (see "Sys-
tem lock").
Demonstration mode is activated.
Turn the control twice briefly anti-clockwise to the
point of resistance then once again, holding it for
approx. 3 seconds.
Problem solving guide
29