Advertisement
ORDERING INFORMATION
DIN connectors
1: Socket
2: Header
<No. of contacts (2 digits)>
20: 20 contacts
32: 32 contacts
50: 50 contacts
64: 64 contacts
96: 96 contacts
00: 100 contacts
<Type and contacts layout>
2: B type (2 rows terminal pitch: 2.54 mm)
3: C type (The middle row is removed terminal pitch: 5.08 mm)
4: C type (3 rows terminal pitch: 2.54 mm)
6: R type (The middle row is removed terminal pitch: 5.08 mm)
7: R type (3 rows terminal pitch: 2.54 mm)
8: Q type (2 rows terminal pitch: 2.54 mm)
<Terminal shape and product types>
PC board
Self-clinching
No.
mountig form
bracket
0
Not available
2
PC board top
mounting type
5
Available
7
PC board edge
1
Not available
mounting type
<Surface treatment (Contact portion/Terminal portion>
1: Au plating/Sn plating
SPECIFICATIONS
1. Characteristics
Item
Rated current
Rated voltage
Electrical
Breakdown voltage
characteristics
Insulation resistance
Contact resistance
Composite insetion force
Mechanical
Unit removal force
characteristics
Post holding force
Lifetime
Insertion and removal life
characteristics
Ambient temperature
Environmental
Soldering temperature
characteristics
resistance
2. Material and surface treatment
Part name
Material
Glass reinforced PBT
Molded portion
(UL94V-0)
Socket contact
Copper alloy
Header post
Brass
Note) Please consult us for different plating requirements.
AXD
44: 44 contacts
90: 90 contacts
Flux
Terminal
resistant
shape
Not available
Available
Not available
DIP terminal
Available
Not available
1,000 V AC for 1 min.
Max. 0.843N {86gf} × no. of contact
Min. 0.15N {15.3gf}
Min. 19.6N {2kgf} (header side)
–55°C to +125°C
260°C: within 10 sec.
300°C: within 5 sec.
350°C: within 3 sec.
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Sn plating on surface
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Sn plating on surface
1
Specifications
2A
300V AC
Min. 1,000MΩ
Max. 20mΩ
1,000 times
Surface
—
panasonic-electric-works.net/ac
DIN CONNECTORS (AXD)
Conditions
Detection current: 1mA
at 500V DC megger
Measured based on the HP4338B measurement method of
JIS C 5402.
Measured by steel gauge with 0.56(t)×0.8(W)mm and
smoothness 0.1s.
At less than 85% R.H. (No freezing at low temperature)
3. Applicable PC board
B, C type socket
Q, R type header
PC board
thickness
B, C type header
Q, R type socket
1.6 to 2.4mm
1.6mm
Advertisement
