Replacing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the tabs on the optical-drive bezel with the slots on the optical
drive and snap the optical-drive bezel into place.
2
Align the screw holes on the optical-drive bracket with the screw holes
on the optical drive.
3
Replace the screws that secure the optical-drive bracket to the optical
drive.
4
Slide the optical-drive assembly into the optical-drive bay.
5
Align the screw hole on the optical-drive bracket with the screw hole on
the base cover.
6
Replace the screw that secures the optical-drive assembly to the base
cover.
18
computer. After working inside your
After working inside your