D 5.10 Configuring An Action - ABB Freelance 2000 Manual

Section D

D 5.10 Configuring an action

An action can be specified for all dynamic graphic object types except trend window. In DigiVis,
this action will be triggered by a single click on the object. An exception is the call-up of a tag
allocation faceplate: the tag is selected with a single click and the associated faceplate is called
up with a double click.
One of the following actions can be configured for any dynamic graphic object:
• Call up a tag allocation faceplate,
• Call up any desired display,
• Write a value to a process variable,
• Acknowledge messages.
→ Press A
CTION
Anything entered here will have the effect of clearing any other entries from the dialog box. An
entry can be made directly or a list can be called up with the F2 key.
Display allocation
Tag allocation
Write variable
Acknowledge
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
D-38
button to bring up the Action parameters window.
tu0570us.bmp
When setting up parameters for a radio field, entries can be made under
O only.
PERATION
When the graphic object is selected in DigiVis, the display entered here
will be called up.
When the graphic object is selected in DigiVis, the faceplate associated
with the tag entered here will be called up.
When the graphic object is selected in DigiVis, the current value of Value
will be written to the variable entered here.
Entering the name of a variable in this field enables the Operation button.
See page D-40, 'Write variable' operation.
When the graphic object is selected in DigiVis, an acknowledge message
is sent to the messages specified here.
Selecting one of the message functions from the selection box enables
the M button. See page D-44, Selection of messages.
ESSAGES
Graphic Display