Double Exposure - Panasonic DP-C266 Operating Instructions Manual

Double Exposure

Both sides (front and back) of a 2-sided original can be copied onto one side of a sheet. Front side of
the original is copied at the top of the page, and the back side at the bottom.
This function is only available when copying a 2-sided original that is smaller than 5.5" x 8.5" in size.
This function can be selected when the original is placed on the Platen Glass.
As the original is placed on the Platen Glass with the ADF open, the position of the original may be erroneously
detected if influenced by ambient light.
If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy
image may be unclear.
1
Open the ADF more than 45 degrees,
and place original on the Platen Glass,
and then leave the ADF open.
Face down. Align
with top left corner.
Refer to Placing Originals (see page 6).
2
Press the Copy key if the machine is
set to other function mode.
3
Select "More Menus".
Ex: Name card (printed on both side)
Original Size: Copy Size:
(less than 5.5" x 8.5") (Letter)
ABC
ABC
DEF
Front Side Image
Back Side Image
4
Select "Insertion / Overlay", and then
select "Double Exposure".
5
Enter the desired number of copies.
6
Press the Start key.
Continued on the next page...
101