Honeywell ADEMCO 6271 Series Installation And Setup Manual page 61

Faults button will be shown. However, if you display the faults,
zone 1 will not be shown as a faulted zone.
• If RF Jam Reports are selected and RF Jam is detected, the User
Authorization screen will display "Trouble ZN100 RF Receiver". If
you enter the console emulation mode, the display will show "Check
90 RF Receiver Jam".
• Do not use the Custom Word reminder feature.
User Related Notes
• Users added to the system using the TouchCenter graphic user
screen must be deleted from the TouchCenter using the graphic
screen as well. Deleting users from the panel by any other means
(alpha keypad, console emulation mode, or Compass downloader)
will not automatically delete them from the TouchCenter.
• If the panel has exit tones enabled and you arm the system in the
Away mode, the TouchCenter will beep continuously throughout
the exit period.
Use the console emulation mode for the following functions:
- Programming more than 10 system users.
- Programming the Pager report option for users of residential
control panels (e.g., VISTA-15P and VISTA-20P).
- Special Function Key operations (such as macros or single-
button paging).
- End-User Scheduling.
- To check for an "Alarm Cancelled" message if this feature
has been enabled in the system.