Command Control Via The Network; Communication Port; Command Control Settings - Hitachi ED-A110A1DN Service Manual

Command Control via the Network

Command Control via the Network

Communication Port

The following two ports are assigned for the command control.
TCP #23
TCP #9715

Command Control Settings

Confi gure the following items form a web browser when command control is used.
Port Settings
Port open
Netowrk Control
Port1 (Port: 23)
Authentication
Port open
Network Control
Port2 (Port: 9715)
Authentication
When the authentication setting is enabled, the following settings are required.
Security Settings
Authentication
Password
Network Control
R e - e n t e r
Authentication
Password
CP-A100 / ED-A100 / ED-A110 (A1DN)
Click the [Enable] check box to open [Network
Control Port1 (Port: 23)] to use TCP #23.
Default setting is "Enable".
C l i c k t h e [ E n a b l e ] c h e c k b o x f o r t h e
[Authentication] setting when authentication
is required.
Default setting is "Disable".
Click the [Enable] check box to open [Network
Control Port2 (Port: 9715)] to use TCP
#9715.
Default setting is "Enable".
C l i c k t h e [ E n a b l e ] c h e c k b o x f o r t h e
[Authentication] setting when authentication
is required.
Default setting is "Enable".
Enter the desired authentication password.
This setting will be the same for [Network
Control Port1 (Port: 23)] and [Network
Control Port2 (Port: 9715)].
Default setting is blank.
75