Line Settings - Siemens optiPoint 410 User Manual

Step by Step
>

44=Line settings?

>
02=1234567890?
>
1=Show in overview?
Switch on?
Switch off?
>
2=Position in overview? >
Line Settings
This option can only be selected if line keys have been
configured (multiline).
Prerequisite: You are in the "Configuration" menu
page 67.
:
Select and confirm. The name of the first line is dis-
>
played.
:
Select the lined to be configured.
>
Activate/Deactivate "Show in Overview"
for Multiline optiPoint display module
Specify here whether or not the individual line should
be shown in the multiline overview optiPoint display
module (
420 standard S V6.0).
:
Select and confirm.
>
:
Confirm. The line appears in the overview.
>
or
:
Confirm. Line display is suppressed.
>
The new setting is displayed.
Position of Line in Multiline Overview Display
Module
Specify the position of the selected line in the multiline
overview optiPoint display module (
with optiPoint 410/420 standard S V6.0).
:
Select and confirm.
o:
Enter the required value for the position and confirm
your entry.
The set position is displayed.
Showing Line Status in Call Information Box
Specify here whether or not the selected line's status
should be shown in a call information box in the
optiPoint display module call view (only with
optiPoint 410/420 standard S V6.0).
Customizing the Telephone
page 148) (only with optiPoint 410/
page 148) (only
81