Yamaha RX-V750 Owner's Manual page 66

SETUP MENU
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize a
• You cannot separately initialize individual
programs.
• You cannot initialize any program groups when MEMORY
GUARD is set to ON.
Zone set
D)ZONE SET
Use to specify the location of speakers connected the
SPEAKERS B terminals.
D)ZONE SET
SP_B;;;;;;FRONT
/
-/+ : Select
Speaker B set SP B
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices: FRONT, ZONE B
• Select FRONT to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select ZONE B if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
Notes
• If you connect headphones to the PHONES jack on the unit, the
sound is output from both headphones and SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual CINEMA DSP mode.
62
sound
field program group.
sound
field
: Exit
Zone 2 set E)ZONE2 SET
(U.S.A., Canada and Australia models only)
E)ZONE2 SET
OUTPUT VOL;;VAR.
ZONE2 AMP;;;OFF
/
-/+ : Select
Output volume OUTPUT VOL
Use to select how the volume control will operate with
regard to the ZONE 2 OUTPUT jacks.
Choices: VAR., FIX
• Select VAR. to adjust the ZONE 2 OUTPUT volume
simultaneously with VOL –/+ on the remote control.
• Select FIX to fix the ZONE 2 OUTPUT volume level
to a standard line level.
Zone 2 amplifier ZONE2 AMP
Use to select how the ZONE 2 speakers will be amplified.
Choices: ON, OFF
• Select OFF if you do not use Zone 2 speakers or if you
connect your Zone 2 speakers through an external
amplifiers connected to this unit's ZONE 2 OUTPUT
jacks.
• Select ON to use this unit's internal amplifier if you
connect your Zone 2 speakers directly to this unit's
PRESENCE/ZONE 2 speaker terminals.
: Up/Down