Rear Panel; Front Panel - Pioneer cdj-2000nxs2 Operating Instructions Manual

Hide thumbs Also See for cdj-2000nxs2:
Table of Contents

Advertisement

Rear panel

For the terminals used for connections, see Descriptions of terminals
on page 9 .

Front panel

1 Disc insertion slot
2 Disc force eject pin insertion hole
About ejecting discs by force
! If the disc cannot be ejected by pressing the [DISC EJECTh] button, the disc can be forcibly ejected by inserting the disc force eject pin into the disc
force eject pin insertion hole on the main unit's front panel.
! When forcibly ejecting a disc, be sure to do so following the procedure below.
1 Press the [u] switch to turn off this unit's power and wait for 1 minute or more.
Never forcibly eject a disc directly after turning off the set's power. Doing so is dangerous for the reasons described below.
The disc will still be spinning when ejected and could hit your fingers, etc., causing injury.
Also, the disc clamp will rotate in an unstable way, and the disc could get scratched.
2 Use the included disc force eject pin. (Do not use anything else.)
The included disc force eject pin is mounted on this unit's bottom panel. When the pin is inserted all the way into the insertion hole, the disc is ejected
5 mm to 10 mm out of the disc insertion slot. Grasp the disc with your fingers and pull it out.
16
En
AUDIO OUT
DIGITAL OUT
1
1
LINK
AC IN
2
1 u switch
Press to turn the power on and off.
2 Kensington security slot
2
3
3 Disc insertion slot indicator
USB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents