Overheating Protection - Panasonic NC-EG4000 Operating Instructions Manual

Press and lift the lid opening
lever to open the lid.
To close
Press down until hearing "click" sound.
If an empty inner container is heated, the overheat safety function (which prevents an empty
inner container from being heated) will be activated. The power will be shut off automatically
to prevent the problems that may occur due to overheating. This will be shown on the display
as shown below.
Flashing alternately
Notice
If an empty inner container is heated, an odor will be emitted and the container
may be discolored.
01_HK_OM_NC-EG2200_3000_4000_EN.indd 9 01_HK_OM_NC-EG2200_3000_4000_EN.indd 9
How to Remove the Lid
Lid opening lever

Overheating Protection

Pull it up slantwise while pressing
the lid lever.
To attach
Insert the lid slantwise.
Causing
Less than the minimum water level in the inner
●
container was boiled.
After water is added, the lid might be left open.
●
How to cancel the display
Supply water into the container,
and press key.
Lid release
lever
9
7/16/2558 BE 14:12 7/16/2558 BE 14:12