Before Requesting Help - Panasonic KX-A272 Operating Instructions Manual

Before Requesting Help

Problem
No function
(LED not lit)
Cannot register
(Green LED flashes) or cell station, or base
Handset beeping
Poor audio quality
A ringing call
suddenly stops
when moving from
zone to zone
(PBX option only)
When talking and
moving from zone to condition', so handover
zone, you hear an
alarm or continuous
noise, or your call is
disconnected.
Possible Cause
No power
Not turned on
Out of range of base
unit cell station not
powered
Verification tone on
Out of range of base
Out of range of handset
Delay when moving from Answer the call before moving
cell station to repeater
during incoming ring
in group ring mode
The new zone is in 'busy Return to original zone and
cannot occur.
Solution
Check AC cord is plugged in
Check AC adaptor is switched on
Move repeater closer to base unit
or cell station
Repeat registration procedure
Check base unit / cell station is on
Switch off verification tone
Move repeater closer to base unit/
Cell Station
Move handset closer to repeater
beyond repeater/cell station
boundary
continue your call
Operating Instructions | 15