Useful Features; Conference (3-Party) - Panasonic KX-TA308 Operating Instructions Manual

1.7

Useful Features

To leave the conference
Any telephone
• The other two parties may continue their conversation.
• If the other two parties are both outside (CO) lines, they will be disconnected.
To talk to the original party while holding the third party
SLT
Flash the hookswitch.
To terminate one party and talk to the other
PT
CO
Press the CO or INTERCOM of
the party to remain connected.
!
• A conference call can also be established by "Executive Busy Override".
!
• When a 2-party call is changed to a 3-party call or vice versa, a confirmation tone is sent to
all parties. The tone can be disabled.
PT • Pressing a CO button which is not in the conference allows you to exit from the conference,
leaving the other two parties connected unless they are both outside (CO) lines.
If the other parties are both outside (CO) lines, they will be disconnected.
PT • If the third party does not answer, press the CO button or INTERCOM button to return to
the second party.
• To change a 3-party conference to a 5-party conference, refer to "Conference (5-party)".
PT
SLT • You can return to the original party before the third party answers by flashing the
hookswitch.
• If "Hold-2" or "Hold-3" is assigned in System Programming, you must dial "20" after
SLT
flashing the hookswitch.
1-60
Operations
Hang up or press SP-PHONE.
Confirmation tone
(optional)
INTERCOM
or
• A conversation with the desired party is established and the other
party is disconnected.
Talk to the original party.
Confirmation tone
(optional)
Talk.