Panasonic KX-TDA0484 Programming Manual page 31

Example 2
The following configuration is used to allocate a single VoIP gateway port (2 channels) to individual
extension groups. Specifically, with this configuration, calls to extension group A are routed through
the port 1, and calls to extension group B are routed through the port 2.
This configuration rejects the third call to extension group A, while reserving the other port (the other
2 channels) through which to route calls to extension group B.
Hunt Group
Hunt Group
Hunt Pattern Entry—1
Hunt Pattern No.
Receive Leading Number
Hunt Group (Priority1)
Hunt Group (Priority2)
Hunt Pattern Entry—2
Hunt Pattern No.
Receive Leading Number
Hunt Group (Priority1)
Hunt Group (Priority2)
Dials "950-101".
Dials "950-102".
Dials "950-103".
Dials "950-201".
Dials "950-202".
It is possible to program the PBX to allocate a single VoIP gateway port to individual extension groups
A and B for making outgoing calls. With this programming, each extension group A and B can have
a port for its exclusive use.
• The VoIP gateway port the extension group A uses to make outgoing calls: port 1
• The VoIP gateway port the extension group B uses to make outgoing calls: port 2
Hunt group 1
1
9501
1
-
2
9502
2
-
PBX (PBX Code: 950)
VoIP Gateway Card
IP Network
Port1 Port2
Hunt group 2
Port 1
Extn. Group A
Channel 1
Channel 2
Extn. 101 ... Extn. 199
Port 2
Extn. Group B
Channel 1
Channel 2
Extn. 201 ... Extn. 299
2.2 Programming
Programming Guide 31