Item
One-touch Dialing
Assignment Mode
Selection
Do you prefer to set the
One-touch dialing only?
: Not available for a PS
*
1
2
: CO button numbers (25–36) are available only when the Add-on Key Module is attached to your
*
telephone.
3
: CO button numbers (25–84) are available only when the Add-on 60 Key Module (KX-NT305) is set up
*
on the KX-NT300 series telephone (not available for the KX-NT366).
: This setting applies to both outside and intercom calls. For intercom calls, this feature must be enabled
4
*
through system programming.
: Only available for certain digital proprietary telephone users.
*
5
6
: Registering and canceling a Bluetooth wireless headset may take time. Please avoid any interruption
*
during that time by, for example, going off-hook.
•
WARNING
There is a risk that fraudulent telephone calls will be made if a third party discovers
your password (extension PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a)
Keeping your PIN secret.
b)
Selecting a complex, random PIN that cannot be easily guessed.
c)
Changing your PIN regularly.
•
After the program number is entered, the program title is displayed.
The programming screen can be changed with the Navigator key (Up or Down).
•
You can select the parameter with the Navigator Key (Up or Down) instead of entering a
number.
Programming
Input
#
3.1 Personal Programming
Selection & Parameter
No—Normal (Any Flexible CO
0
buttons can be modified.)
Yes—Only One-touch dialing
buttons can be modified. However,
1
to modify them, there is no need to
enter "2" before the number.
Operating Manual
171