Table of Contents
Advertisement
2.3 Connecting to Power
Use only the supplied car adapter to power up the camcorder and charge
the built-in battery.
1.
Connect one end of the car adapter to the USB connector of the
camcorder. USB port input: DC 5V / 1A.
2.
Plug the other end of the car charger to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically turns on. Car charger input: DC 12 / 24V.
Note:
1. To use the products of the attached power charger only, please do not use other
brand power charger, in order to avoid equipment burn or cause the battery
explosion.
2. Red LED light indicates the battery is charging; when camcorders are connecting
power cord to charge and the red light flashes, it indicates the camcorder
temperature is too high and should unplug the power cord immediately.
3. Please take note if the environment temperature reaches 45°C or above, the car
adapter still can supply power to camcorder, but it will not charge the Lithium-ion
battery. This is the characteristic of Lithium-ion and is not a malfunction.
12
Advertisement
Table of Contents
