Panasonic AG-DV2000P Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. VCR
  5. AG-DV2000P
  6. Operating instructions manual
Panasonic AG-DV2000P Operating Instructions Manual

Panasonic AG-DV2000P Operating Instructions Manual

Digital video cassette recorder
Hide thumbs Also See for AG-DV2000P:
Table of Contents

Advertisement

Quick Links

See also: Operating Instructions Manual
Operating
Instructions
Mini
NTSC
AG-
P
Professional/Industrial Video
Digital Video Cassette Recorder
Before attempting to connect, operate or adjust this product, please read these instructions completely.
VQT7774

Advertisement

Table of Contents
loading

Related Manuals for Panasonic AG-DV2000P

Summary of Contents for Panasonic AG-DV2000P

  • Page 1 Operating Instructions Mini NTSC Professional/Industrial Video Digital Video Cassette Recorder Before attempting to connect, operate or adjust this product, please read these instructions completely. VQT7774...

  • Page 2: Dear Customer

    Dear Customer Thank you for purchasing this Panasonic Digital Video Cassette Recorder. We recommend that you carefully study the Operating instructions before attempting to operate the unit and that you note the listed precautions. WARNING: TO REDUCE THE RISK OF FIRE OR...

  • Page 3: Table Of Contents

    Advanced Operations Search Functions Index Search System Photoshot Index Search System Various Settings Setting the Clock of Your VCR Settings Using On Screen Display Preparations for Editing Editing Functions Connecting with a Digital Video Camera Connecting Two Digital Video Cassette Recorders...

  • Page 4: Controls And Connection Sockets

    This section gives a detailed explanation of the function of each button, switch and connection socket. FRONT POWER Press to switch the VCR from on to standby mode or vice versa. In standby mode, the unit is still connected to the mains.
  • Page 5 26 S-VIDEO IN (AV2) To connect the S-Video cable to a movie camera or to another VCR that has an S-Video output socket. If an S-Video cable is connected, other video input (AV2) is automatically switched off.
  • Page 6 VCR. 39 S-VIDEO IN (INPUT1) To connect the S-Video cable to a movie camera or to another VCR that has an S-Video output socket. If an S-Video cable is connected, other video input (INPUT1) is automatically switched off.

  • Page 7: Infra-Red Remote Controller

    VCR1/2/3 press one of these While holding down POWER buttons to select the remote control mode. Set this position on both the VCR and VCR1 : remote controller for normal use with one VCR. Set this position when using two VCR2: Panasonic VCRs.
  • Page 8 When pressed once: Still picture. When pressed for 2 seconds or more: Slow playback. During recording: To pause recording. 16 DISPLAY To change the VCR display indication as follows: Remaining Clock Time Tape Time Code The time code frame values are not displayed on the main unit’s VCR display.

  • Page 9: Editing Controller

    VCR display. DATE-OFF/ON, DATE-SELECT When pictures are recorded using this VCR or a Panasonic Digital Video Camera, the date and time of the recording are automatically recorded onto the tape’s sub code track. This button is used to select the information to be displayed on the On Screen Display.
  • Page 10 VCR. VCR2: Set this position when using two Panasonic VCRs. VCR3: Set this position when using three Panasonic VCRs. Note: While in the editing mode the VCR’s Time code or tape counter display cannot be changed. STEREO1 STEREO2 (MIX)

  • Page 11: Remote Controller Setup

    Remote Controller Setup Installing the Batteries 1 To remove the cover, slide it in the direction of the arrow while pressing down. Load the batteries with their polarity correctly. Slide the cover back on. Power Source for the Remote Controller The remote controller is powered by 2 AA, UM3 or R6 size batteries.
  • Page 12 30 degrees to the left or right of centre. (This range changes in accordance with the ambient brightness.) Note: When the VCR’s remote control mode has been switched, switch the remote control mode on the editing controller as well.

  • Page 13: Connections

    Connections Use AV cables to connect the input sockets on this unit with the output sockets on the video equipment. Press INPUT SELECT on this unit so that A1, A2 or DV IN is selected. When using the BNC socket, use a BNC-PHONO conversion adapter (sold separately). If the video equipment is connected to this unit via an S-VIDEO cable, the video signal on the S-VIDEO cable takes priority.

  • Page 14: Playback

    Playback Note: If you keep (FF) or (REW) pressed in step 3 or 4, search playback is activated while the button is pressed, and operation returns to normal playback when the button is released. Operations Insert a recorded cassette tape (page 13).

  • Page 15: Other Playback Functions

    When a cassette with the opened record prevention tab is inserted, the VCR starts playback automatically. Forward VCR-off Playback When the VCR is off, an inserted cassette can be played back by pressing Automatic Rewinding When the tape reaches the end during recording or playback, it will automatically be rewound to the beginning.

  • Page 16: Manual Recording

    Manual Recording Note: A long-Mini DV cassette (SP/80 min., LP/120 min.) that was recorded by this VCR cannot be played back or recorded by a DVCPRO or DVCPRO 50 format VCR. Operations Insert a video cassette with the closed record prevention tab (page 13).

  • Page 17: Search Functions

    Photoshot Index Search System Photo shot index signals are automatically recorded when a Panasonic Digital Video Camera is used for Photo shot Mode. Photo shot images are searched using these signals, and when such an image is located, the image is played back as a still picture.

  • Page 18: Setting The Clock Of Your Vcr

    Setting the Clock of Your VCR The built-in digital clock employs the 24-hour system. Preparations Confirm that the monitor is on and the VCR viewing channel is selected. Turn on the VCR and monitor. Operations Press MENU, and then select CLOCK ADJUST.

  • Page 19: Settings Using On Screen Display

    Settings Using On Screen Display The VCR indications shown on the monitor screen are known as the On Screen Display (OSD). This VCR allows many settings to be made at the OSD. Preparations Confirm that the monitor is on and the VCR viewing channel is selected.

  • Page 20: Power Save Mode

    Select OFF, 2H or 6H. OFF: This setting does not conserve power when the VCR is off. The VCR turns off automatically if no operation is performed for approximately two hours. The VCR turns off automatically if no operation is performed for approximately six hours.

  • Page 21: Initial Setting

    When performing recording and playback in color. Press MENU twice to exit the On Screen Display. Initial Setting If you want to return the VCR to the factory-preset condition, follow the procedure below. Press MENU, and then select OPTION INITIAL.

  • Page 22: Editing Functions

    Editing Functions Using this VCR, 4 types of One-Touch-Edit, 3 types of Manual Editing and 3 types of Program Editing can be selected. In Program Editing, after setting the edit start/end point, editing can be performed automatically. Edit programs can be set up to 10 scenes for each editing function (40 scenes for Assemble editing).

  • Page 23: Audio Dubbing

    Audio Dubbing Allows the addition of the new sound on the STEREO2 track of a recorded tape. The original sound is left on the STEREO1 track. Recording VCR Subcode Picture Sound(STEREO1) Sound(STEREO2) Sounds from the Playback Unit Audio Mixing Allows the mixing of the the original sound on the STEREO1...

  • Page 24: Connecting With A Digital Video Camera

    Connecting with a Digital Video Camera Example for connecting Panasonic Digital Video Camera as the playback unit, when controlling the playback unit through this unit. Notes: Before connecting any cables, first make sure that the power for both units is off.
  • Page 25 Playback Unit (Digital Video Camera) Turn the power on. Make the Time code appear on the LCD monitor or the viewfinder. Prepare the tape for playback. Recording Unit (this unit) Turn the power on. Set EDIT MODE to RECORDER. Set EDIT CONTROL to EDIT.

  • Page 26: Connecting Two Digital Video Cassette Recorders (Using Two Ag-Dv2000)

    Connecting Two Digital Video Cassette Recorders (Using two AG-DV2000) Example for connecting this unit, when controlling the playback VCR through the recording VCR. Refer to the diagram below and connect the cables required for the desired editing function. Notes: Before connecting any cables, first make sure that the power for both VCRs is off.
  • Page 27 Connect two monitors, one to each of the VCRs, so that the screens from both VCRs can both be seen. Set EDIT CONTROL on both the playback VCR and the recording VCR to EDIT. Press INPUT SELECT on the playback VCR and select a position to which a cable is not connected.
  • Page 28 EDIT MENU screens. Be sure to quit these screens before changing these settings. When using this VCR as the recording VCR, the On Screen Display (date/time, Time Code) may scroll vertically when still playback or slow playback are performed by the playback VCR.
  • Page 29 Use AV cables to connect the output sockets on this unit with the input sockets on the S-VHS (VHS) VCR. Connect two monitors, one to this VCR and one to the S-VHS (VHS) VCR, so that the screens from both VCRs can both be seen.

  • Page 30: Initial Settings For Editing

    Initial Settings for Editing This VCR also allows some settings for editing to be made at the On Screen Display (OSD). Preparations Confirm that the monitor is on and the VCR viewing channel is selected. Complete necessary connections and settings.
  • Page 31 The AV-IN Color Level and AV-IN Hue Level can be selected in following cases: INPUT SELECT is set to A1 or A2; When the VCR is in stop mode Normally set this position. To adjust the color level of the input external recording source connected to A1 or A2.
  • Page 32 “DV Time code”. OFF: When a non-digital video equipment is connected. Also use this setting if a digital video equipment is connected but that VCR’s counter mode is set to tape counter display. Press EXIT to exit the On Screen Display. Notes:...

  • Page 33: Creating The Tapes For Editing

    [Playback unit] [Recording unit] This VCR first rewinds the tape to the section prior to the edit start point and then commences editing. For this reason, accurate editing cannot be performed if the tape has been left blank or if the picture and sound have not been recorded properly for 20 seconds prior to the edit start point.

  • Page 34: Editing When Not Using An Edit Cable

    Editing when Not Using an Edit Cable To connect a VCR or Movie Camera without an Edit Socket and use this unit as the Recording VCR. Preparations Complete necessary connections and settings. See pages 24-33. Connect the INPUT1 or AV2 on this unit to the playback unit.
  • Page 35 LP mode. It is necessary to first copy the tape in SP mode. Video Insert and Audio Insert are not possible in the following cases: When the tape in the recording VCR (this unit) is: Recorded in LP mode: Blank, or contains a blank portion in the middle.

  • Page 36: One-Touch Assemble

    Search for the edit start point on the playback unit using Jog dial and Shuttle Ring on this unit. Press JOG/SHUTTLE on this unit. Editing begins. To continue editing, press JOG/ SHUTTLE on this VCR, and repeat steps 4-5. Press (STOP) on this unit to stop editing.
  • Page 37 Notes: Although Assemble editing can be performed in LP mode, Insert, Audio Dubbing, and Audio Mixing cannot be performed with a tape recorded in LP mode. It is necessary to first copy the tape in SP mode. In order to ensure that the editing operation is performed properly, the editing points should be set at least 20 seconds after the beginning of the tape.

  • Page 38: One-Touch Insert/Audio Dubbing

    AUDIO INSERT (or vice versa). To add new sound: Press AUDIO DUB. The indicator that corresponds to the selected editing mode lights on the VCR display. The picture from the playback unit appears on the screen. Indicators On the VCR Display...
  • Page 39 Notes: Video Insert and Audio Insert are not possible in the following cases: When the tape in the recording VCR (this unit) is: Recorded in LP mode; Blank, or contains a blank portion in the middle. AV Insert and Audio Dubbing are not possible in the...

  • Page 40: One-Touch Audio Mixing

    AUDIO MIX: To adjust the volume of the original audio (STEREO1). AUDIO REC LEVEL: To adjust the volume of the audio from external recording source (A1 or A2). To continue editing, press JOG/SHUTTLE on this VCR, and repeat steps 5-6.
  • Page 41 Press STEREO SELECT during playback and select STEREO2. Notes: Audio Mixing is not possible in the following cases: When the tape in the recording VCR (this unit) is: Recorded in 16bit audio mode; Recorded in LP mode; Blank, or contains a blank portion in the middle.

  • Page 42: Manual Copying

    Manual Copying This function can be used to copy tapes between digital video equipments with practically no deterioration in quality. This function can also copy a tape that was recorded in S-VHS (VHS) format onto a digital video tape. Preparations Complete necessary connections and settings.
  • Page 43 Press RECORDER, and then press JOG/SHUTTLE. The picture from the recording VCR appears on the screen. Search for the edit start point on the recording VCR. Select Start Copying. Press OK. Editing begins. Press EDIT MENU to stop editing. Operation now returns to the screen which appears in step 3.

  • Page 44: Manual Insert

    Note: Video Insert and Audio Insert are not possible in the following cases: When the tape in the recording VCR (this unit) is: Recorded in LP mode; Blank, or contains a blank portion in the middle. On Screen Display...
  • Page 45 The On Screen Display disappears. Notes: AV Insert is not possible in the following cases: When the tape in the recording VCR (this unit) is: Recorded in 16bit audio mode; Recorded in LP mode: Blank, or contains a blank portion in the middle.

  • Page 46: Manual Audio Dubbing

    Manual Audio Dubbing This function is used to add new sound on the STEREO2 track of previously recorded tape. Preparations Complete necessary connections and settings. See pages 24-33. Operations Press EDIT MENU. Select Audio Dubbing, and then Press Press PLAYER and JOG/SHUTTLE. The picture from the playback unit appears on the screen.
  • Page 47 Press STEREO SELECT during playback and select STEREO2. Notes: Audio Dubbing is not possible in the following cases: When the tape in the recording VCR (this unit) is: Recorded in 16bit audio mode: Recorded in LP mode; Blank, or contains a blank portion in the middle.

  • Page 48: Program Editing

    Program Assemble This function can be used to link together desired scenes on a tape. This function can also be used to skip unnecessary scenes recorded on a tape and copy them onto a separate tape. Preparations Complete necessary connections and settings. See pages 24-33.
  • Page 49 Press PLAYER and JOG/SHUTTLE. The picture from the playback unit appears on the screen. Search for the edit start point on the playback unit and press MARK IN. Search for the edit end point on the playback unit and press MARK OUT. (Continued on next page) Notes: Although Assemble editing can be pet-formed in LP mode,...
  • Page 50 Program Assemble (continued) Press RECORDER and JOG/ SHUTTLE. The picture from the recording VCR appears on the screen. Search for the edit start point on the recording VCR and press MARK IN. Press OK. “OK: done” is not displayed at the bottom of the screen.
  • Page 51 Select Start Assemble to start editing, and then press OK. Editing begins after the playback unit and the recording VCR both rewind their tapes to the edit start points. After completing editing, select Review, and then press OK. The edited pictures are played back.

  • Page 52: Program Insert

    4-digit counter. Video Insert and Audio Insert are not possible in the following cases: When the tape in the recording VCR (this unit) is: Recorded in LP mode; Blank, or contains a blank portion in the middle.
  • Page 53 MARK OUT. (Continued on next page) AV Insert is not possible in the following cases: When the tape in the recording VCR (this unit) is: Recorded in 16bit audio mode; Recorded in LP mode: Blank, or contains a blank portion in the middle.
  • Page 54 Program Insert (continued) Press RECORDER and JOG/ SHUTTLE. The picture from the recording VCR appears on the screen. Search for the edit start point on the recording VCR and press MARK IN. Press OK. To check and change programs: Select Confirm/Change and then press OK.
  • Page 55 Select Preview to confirm the editing operation before performing actual editing, and then press OK. Preview begins after the playback unit and the recording VCR both rewind their tapes to the edit start points. Select Start Insert to start editing, and then press OK.

  • Page 56: Program Audio Dubbing

    (page 61) whenever you set a program under a different editing mode. Audio Dubbing is not possible in the following cases: When the tape in the recording VCR (this unit) is: Recorded in 16bit audio mode; Recorded in LP mode;...
  • Page 57 Select Audio Dubbing, and then press Press PLAYER and JOG/SHUTTLE. The picture from the playback unit appears on the screen. Search for the edit start point on the playback unit and press MARK IN. Search for the edit end point on the playback unit and press MARK OUT.
  • Page 58 Program Audio Dubbing (continued) Press RECORDER and JOG/ SHUTTLE. The picture from the recording VCR appears on the screen. Search for the edit start point on the recording VCR and press MARK IN. Press OK. To check and change programs: Select Confirm/Change and then press OK.
  • Page 59 Select Preview to confirm the editing operation before performing actual editing, and then press OK. Preview begins after the playback unit and the recording VCR both rewind their tapes to the edit start points. Select Start Dubbing to start editing, and then press OK.

  • Page 60: Other Editing Functions

    Other Editing Functions These functions are used to confirm, change, etc. programs. Once all program settings are completed, the screen shown at right is displayed. Example: Video Insert This portion varies, depending on the editing function that was programed. To check/change programs: 1 Select Confirm/Change, and then press OK.
  • Page 61 between insert a new program 1 Select Insert a program, and then press OK. The program list is displayed. 2 Select the program number where a program is to be inserted, and then press OK. The Insert a program screen is displayed. 3 Refer to the pages that describe the Program Editing functions (on pages 48-59), and set the new program.

  • Page 62: Edit Timing Adjustment

    Edit Timing Adjustment When performing editing in conjunction with a unit which has a different mechanism, there may be a lag in the edit start point due to a deviation between the time a pause cancellation signal is received by the recording unit and the time recording actually begins.
  • Page 63 Select Timing Adjust, and then press Adjust the timing for the edit start point by setting the amount of the discrepancy for the start-up time. The setting is displayed in frames (apporoximately 1/30 of a second) units. Press if the start point is too early; if it is too late.

  • Page 64: Manual Editing

    Edit Timing Adjustment (continued) Manual Editing If there is a deviation in the results of a manual editing operation, the timing of the edit start (In) position on the playback unit can be adjusted by approximately ±1 second. Perform the procedure described below when setting an edit start point in any editing mode.

  • Page 65: Glossary Of Terms

    Insert, Audio Dubbing, and Audio Mixing functions cannot be used with a tape that was recorded in LP mode. When a cassette recorded in LP mode on this VCR is played back on other digital video equipment. When a cassette recorded in LP mode on other digital video equipment is played back on this VCR.
  • Page 66 In addition, the DV terminal on this unit can also send control signals that are required in editing operations. If a Panasonic Digital Video Camera is used as the playback unit, only one DV cable needs to be connected between the...

  • Page 67: On Screen Display Messages

    [Please insert video tape.] REC, (PLAY), (REW) or JOG/ (FF), SHUTTLE is pressed when no cassette is in the VCR. Insert a video cassette. [Recording not allowed. Check setting of the record- prevention tab.] REC, VIDEO INSERT, AUDIO INSERT or AUDIO DUB has been pressed when using a cassette with the opened record-prevention tab.

  • Page 68: Before Requesting Service

    ”. Distance is too far. Use remote controller within 7 m of the VCR. If operation is not possible in this range, replace the batteries. Batteries are spent. Replace the batteries. Note the precautions for replacement on page 11.
  • Page 69 The tape speed (SP/LP) or the audio mode (12bit/ 16bit) changed in the middle of the tape in the recording unit. The end of the tape was reached in the VCR. The VCR was suddenly not able to control the connected unit.

  • Page 70: Flow Chart For On Screen Display

    Flow Chart for On Screen Displays SET UP On Screen Display...
  • Page 71 EDIT MENU On Screen Display (Manual Editing) Programme Editing (See page 72.)
  • Page 72 Flow Chart for On Screen Displays (continued) Program Editing On Screen Display...

  • Page 73: Usage Precautions

    If the VCR is suddenly moved from a cold place to a warm place, condensation may form on the tape and inside the VCR. In this case, the “ ” dew indicator will flash on and off and the VCR will not operate.
  • Page 74 As soon as the dew disappears, the VCR will turn itself off again. Note: Do not operate the VCR for at least 1 hour if any of the above conditions occur.

  • Page 75: Specifications

    Specifications AG-DV2000P Power Source: Power Consumption: Power Consumption When in Standby Mode: Video Recording System: Audio Recording System: Video Heads: Tape Speed: Tape Format: Record/Playback Time: FF/REW Time: VIDEO Television System: Modulation System: Input Level: Output Level: AUDIO Input Level:...
  • Page 76 Division of Matsushita Electric Corporation of America Executive Office One Panasonic Way (4B-7) Secaucus, NJ 07094 Service Centers Eastern: One Panasonic Way, Panazip (2A-4) Secaucus, NJ 07094 (201)-348-7677 Fax (201)-348-7511 Southern: 1225 Northbrook Parkway, Suite #170, Suwanee, GA 30174 (770)-338-6855 Fax (770)-338-6656 Western: 4001 West Alameda Ave., Suite 100, Burbank, CA 91505...

Table of Contents