Symbol; Specifications - Hitachi C 18DSL Handling Instructions Manual

English
3. If you fi nd rust, foul odor, overheating, discolor, deformation, and/
or other irregularities when using the battery for the fi rst time, do
not use and return it to your supplier or vendor.
WARNING
If an electrically conductive foreign object enters the terminals of the
lithium ion battery, a short-circuit may occur resulting in the risk of
fi re. Please observe the following matters when storing the battery.
○ Do not place electrically conductive cuttings, nails, steel wire,
copper wire or other wire in the storage case.
○ Either install the battery in the
power tool or store by securely
pressing into the battery cover
until the ventilation holes are
concealed to prevent short-
circuits (See Fig. 8).

SYMBOL

WARNING
The following show symbols used for the machine. Be sure that
you understand their meaning before use.
Read all safety warnings and all instructions.

SPECIFICATIONS

POWER TOOL
Model
No-load speed
Cutting
Capacity
depth
Rechargeable battery
Light bulb
Weight
CHARGER
Model
Charging voltage
Weight
90°
45°
BSL1830: Li-ion 18 V (3.0 Ah 10 cells)
32
Ventilation holes
Latch
Rechargeable battery
Fig. 8
C18DSL
3400 /min
57 mm
40 mm
12 V, 5 W
3.2 kg
UC18YRSL
14.4 V 18 V
0.6 kg
Terminals
Battery cover