Settings - Panasonic Hi-Fi) Operating Instructions Manual

Settings

VCR
RF-Coaxial cable
21-pin Scart cable
8
Connect all the cables as shown in the illustration, then connect the AC Mains
lead (part of the package) to an AC wall outlet.
To be able to receive TV programmes it is mandatory to connect the RF-Coaxial
Aerial
cable even if the video recorder is connected by a 21-pin Scart cable.
TV
If you decide to just use the RF-Coaxial cable to connect the TV set you must
adjust the video output channel with the TV set's input channel.
!
Switch on the video recorder
!
Press the
on the display.
!
Tune the TV set until the test pattern appears.
If there is any interference select another channel for the TV set and
video recorder.
!
Press the
!
Tune the TV set until the test pattern appears.
!
Press
MENU button for approx. 7 seconds. The preset channel appears
CH button to change the channel (e.g. to 38).
ENTER to confirm.
CH