Advertisement

VC-A582U/A582U(A)
VC-H982U
1. GENERAL INFORMATION .............................. 4
1-1 FEATURES ................................................. 4
1-2 SPECIFICATIONS ..................................... 4
AND CONTROL ......................................... 5
MAIN PWB ASSEMBLY ............................. 7
PARTS .............................................................. 9
ADJUSTMENT JIG .................................. 11
5. ELECTRICAL ADJUSTMENT ........................ 30
POINT ....................................................... 31
SHARP CORPORATION
SERVICE MANUAL
MODELS
In the interests of user-safety (Required by safety regula-
tions in some countries) the set should be restored to its
original condition and only parts identical to those specified
be used.
CONTENTS
Page
7. TROUBLESHOOTING ................................... 39
8. BLOCK DIAGRAM ..........................................51
10.REPLACEMENT PARTS LIST ....................... 77
12.PACKING OF THE SET ................................. 95
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
1
VIDEO CASSETTE RECORDER
VC-A582U
VC-A582U(A)
VC-H982U
OF STILL PICTURE ................................. 31
5-3 CHECKING OF OFF TRACK ................ 31
5-5 ADJUSTMENT OF FILTER ...................... 32
SEPARATION ...........................................32
AND TROUBLESHOOTING GUIDE .............. 33
PATTERN ....................................................... 61
PARTS ............................................................ 90
VC-A582U
VC-A582U(A)
VC-H982U
SY7J5VCA582U/
Page

Advertisement

Table of Contents
loading

Summary of Contents for Sharp VC-H982U

  • Page 1: Table Of Contents

    VC-A582U VC-A582U(A) VC-H982U SERVICE MANUAL SY7J5VCA582U/ VIDEO CASSETTE RECORDER VC-A582U VC-A582U/A582U(A) VC-A582U(A) VC-H982U MODELS VC-H982U In the interests of user-safety (Required by safety regula- tions in some countries) the set should be restored to its original condition and only parts identical to those specified be used.
  • Page 2 VC-A582U VC-A582U(A) VC-H982U IMPORTANT SERVICE NOTES etc.) and measure the AC voltage drop across the BEFORE RETURNING THE VIDEO CASSETTE resistor. Reverse the AC plug on the set and repeat RECORDER AC voltage measurements for each exposed part. Before returning the video cassette recorder to the user, Any reading of 0.45V rms (this corresponds to 0.3mA...
  • Page 3 VC-A582U VC-A582U(A) VC-H982U PRECAUTIONS IN PART REPLACEMENT When servicing the unit with power on, be careful to the section marked white all over. This is the primary power circuit which is live. When checking the soldering side in the tape travel mode, make sure first that the tape has been loaded and then turn over the PWB with due care to the primary power circuit.
  • Page 4: General Information

    Output level: –8dBs (309mVrms, 1k ohm) Frequency response: 80Hz ~ 10kHz (SP mode linear), 20Hz ~ 20kHz (Hi-Fi mode) Signal to noise ratio: 43dB (SP mode linear) Hi-Fi Dynamic range: 90dB (VC-H982U) Wow and flutter: 0.005% max. (Hi-Fi mode) with T-120 tape 4) Receiving channel...
  • Page 5: Location Of Major Components And Control

    VC-A582U VC-A582U(A) VC-H982U 1-3 LOCATION OF MAJOR COMPONENTS AND CONTROL...
  • Page 6: Disassembly And Reassembly

    VC-A582U VC-A582U(A) VC-H982U 2. DISASSEMBLY AND REASSEMBLY 2-1 DISASSEMBLY OF MAJOR BLOCKS : Remove 3 screws 1. : Remove 1 screw q with drum shield. TOP CABINET DRUM SHIELD : Remove shuttle switch knob 2. : Remove 2 screws 7, 1 screw 8, 1...
  • Page 7: Disassembling The Mechanism/Main Pwb Assembly

    VC-A582U VC-A582U(A) VC-H982U 2-2 DISASSEMBLING THE MECHANISM/MAIN PWB ASSEMBLY 2. Removing the mechanism and cassette controller 1. When removing the mechanism from the main PWB, Remove 2 screws 4 fixing the cassette controller to the remove the antenna cover 1 screw 1, and remove the mechanism, and remove the cassette controller.
  • Page 8: Cares When Reassembling

    VC-A582U VC-A582U(A) VC-H982U 2-3 CARES WHEN REASSEMBLING cassette controller. (Conditions: When mechanism and INSTALLING THE CASSETTE CONTROLLER PWB have been installed) When the cassette controller is installed on the mecha- nism, the initial setting is essential condition. 2. Mechanical initial setting...
  • Page 9: Function Of Major Mechanical Parts

    VC-A582U VC-A582U(A) VC-H982U 3. FUNCTION OF MAJOR MECHANICAL PARTS (TOP VIEW) Function Function Full erase head Tu main brake Sup pole base Pinch drive cam Tension arm A/C Head ass’y Idler ass’y Reverse guide Pinch drive lever ass’y Casecon drive gear...
  • Page 10 VC-A582U VC-A582U(A) VC-H982U FUNCTION OF MAJOR MECHANICAL PARTS (BOTTOM VIEW) Function Function Upper and lower drum ass’y Reel belt Loading motor Clutch lever Drum motor Limiter pulley ass'y Tu pole base ass’y Casecon drive gear Slow brake Shifter Master cam Fixing guide Capstan D.D.
  • Page 11: Adjustment, Replacement And Assembly Of Mechanical Units

    VC-A582U VC-A582U(A) VC-H982U 4. MECHANISM ADJUSTMENT, REPLACEMENT, ASSEMBLING AND CLEAN- ING METHODS The explanation given below relates to the on-site general service (field service) but it does not relates to the adjustment and replacement which need high-grade equipment, jigs and skill. For example, the drum assembling, replacement and adjustment service must be performed by the person who have finished the technical courses.
  • Page 12 VC-A582U VC-A582U(A) VC-H982U MAINTENANCE CHECK ITEMS AND EXECUTION TIME Perform the maintenance with the regular intervals as follows so as to maintain the quality of machine. Maintained 500 1000 1500 2000 3000 Possible symptom Remarks Parts hrs. hrs. hrs. hrs.
  • Page 13 VC-A582U VC-A582U(A) VC-H982U REMOVING AND INSTALLING THE CASSETTE Notes: HOUSING 1. When fitting the S/E sensor holder to the cassette controller frame L/R, take care. • Removal 2. Misengagement of teeth of casecon drive gear and drive 1. In the cassette removing mode remove the cassette.
  • Page 14 VC-A582U VC-A582U(A) VC-H982U REEL DISK REPLACEMENT AND HEIGHT 4. Assemble the Sup main brake ass'y. CHECK Notes: • Removal 1. When installing the reel disk, take due care so that the 1. Remove the cassette housing control assembly. tension band ass'y is not deformed and grease does no 2.
  • Page 15 VC-A582U VC-A582U(A) VC-H982U Note: Notes: Whenever replacing the reel disk, perform the height check- 1. Hold the torque gauge by hand so that it is not moved. ing and adjustment. 2. Do not keep the reel disk in lock state. Do not allow long- time measurement.
  • Page 16 VC-A582U VC-A582U(A) VC-H982U Notes: CHECKING AND ADJUSTMENT OF TAKE-UP 1. Hold the torque gauge by hand so that it is not moved. TORQUE IN VIDEO SEARCH REWIND MODE 2. Do not keep the reel disk in lock state. Do not allow long- •...
  • Page 17 VC-A582U VC-A582U(A) VC-H982U CHECKING THE VIDEO SEARCH REWIND BACK TENSION • Remove the cassette housing control assembly. • After short-circuiting TP801 provided at the center Tension gauge Pinch roller (facing to the main PWB), plug in the power cord. 900 - 1,200g •...
  • Page 18 VC-A582U VC-A582U(A) VC-H982U 2. Visually check to see if the right edge of the tension pole Tension pole adjuster adjusting range is within the 1.5 ± 0.25 from the right edge of the Sup guide shaft. Tension pole adjuster Sup guide shaft Tension pole 1.5 ±...
  • Page 19 VC-A582U VC-A582U(A) VC-H982U • Adjustment • Checking the brake torque at the take-up side 1. If the indication of torque cassette meter is lower than the setting, shift the tension spring engagement to the part A. Torque gauge 2. If the indication of torque cassette meter is higher than the setting, shift the tension spring engagement to the part B.
  • Page 20 VC-A582U VC-A582U(A) VC-H982U REPLACEMENT OF A/C (Audio/Control) HEAD 3. Align the left end of gear of A/C head arm with the punched mark of chassis, tentatively tighten the screws 1. Remove the cassette housing control assembly. 1 and 2 so as to ensure smooth motion of A/C head 2.
  • Page 21 VC-A582U VC-A582U(A) VC-H982U A/C HEAD HEIGHT ROUGH ADJUSTMENT HEIGHT ADJUSTMENT OF REVERSE GUIDE • Setting 1. Adjust the height from the mechanism chassis to the Azimuth screw reverse guide lower flange to 13.38 mm, using the reverse guide height adjustment jig, in tape loading state.
  • Page 22 VC-A582U VC-A582U(A) VC-H982U Notes: ADJUSTMENT OF TAPE DRIVE TRAIN 1. Previously set the tracking control in the center position, 1. Tape run rough adjustment and adjust the envelop waveform to maximum with X 1 Remove the cassette housing control assembly.
  • Page 23 VC-A582U VC-A582U(A) VC-H982U 3. Tape run adjustment PB CHROMA 1 Connect the oscilloscope to PB CHROMA envelope Envelope output test point, set oscilloscope sync to EXT, trigger-input the PB CHROMA signal (head switch- ing pulse). 2 Rough adjustment of X value...
  • Page 24 VC-A582U VC-A582U(A) VC-H982U REPLACEMENT OF DRUM D.D. MOTOR REPLACEMENT OF THE CAPSTAN D.D. 1. Set the ejection mode. (DIRECT DRIVE) MOTOR 2. Withdraw the main power plug from the socket. • Remove the mechanism from the main PWB (refer to Page 7 "1.
  • Page 25 VC-A582U VC-A582U(A) VC-H982U REPLACING THE UPPER AND LOWER DRUM ASSEMBLING OF PHASE MATCHING ASSEMBLY MECHANISM COMPONENTS • Assemble the phase matching mechanism compo- • Replacement (Perform in the numerical order) nents in the following order. 1 Remove the motor as stated in Page 24 D.D. motor 1.
  • Page 26 VC-A582U VC-A582U(A) VC-H982U 1Insert Reverse Guide Lever Ass’y Insert reverse guide lever ass'y 2 Insert pinch drive cam Align here. Turn the reverse guide lever assembly counterclockwise Fit the pinch drive cam so that the notch of pinch to the stopper.
  • Page 27 VC-A582U VC-A582U(A) VC-H982U 1. Make sure that the loading gear is at the point 1 as INSTALLING THE SHIFTER shown below. 2. Install, paying attention to 6 insertion points and 3 release points. Drum 3. For the phase matching at the insertion point 1, see the Capstan point 2 as shown below.
  • Page 28 VC-A582U VC-A582U(A) VC-H982U INSTALLING THE MASTER CAM (AT REAR REPLACEMENT OF LOADING MOTOR • Removal SIDE OF MECHANISM CHASSIS) 1. Make sure beforehand that the shifter is at the point as shown below. 2. Place the master cam in the position as shown below.
  • Page 29 VC-A582U VC-A582U(A) VC-H982U ASSEMBLY OF CASSETTE HOUSING 1. Drive Gear and R Drive angle ass’y MSPRT0381AJFJ Apply grease Apply grease Apply grease Figure 4-47. 2. Synchro Gear, Drive Gear L and Drive Gear R LANGF9592AJFW Top surface should be free from scratches or soil.
  • Page 30: Electrical Adjustment

    VC-A582U VC-A582U(A) VC-H982U 5. ELECTRICAL ADJUSTMENT Notes: • Before the adjustment: Electrical adjustments discussed here are often required after replacement of electronic components and mechanical parts such as video heads. Check that the mechanism and all electric components are in good working condition prior to the adjustments,otherwise adjustments can not be completed.
  • Page 31: Adjustment Of Head Switching Point

    VC-A582U VC-A582U(A) VC-H982U SERVO CIRCUIT ADJUSTMENT 5-2 ADJUSTMENT OF FV (False Vertical Sync) OF STILL PICTURE 5-1 ADJUSTMENT OF HEAD SWITCHING Measuring Color TV monitor POINT instrument Measuring Dual-trace oscilloscope Mode Playback still instrument Cassette Self-recorded tape (SP mode) Mode...
  • Page 32: Adjustment Of Sif-Input Level

    VC-A582U VC-A582U(A) VC-H982U MTS CIRCUIT ADJUSTMENT. 5-6 ADJUSTMENT OF STEREO VCO (HI-FI MODELS ONLY) Measuring AC milli-voltmeter instrument 5-4 ADJUSTMENT OF SIF-INPUT LEVEL Mode Measuring AC milli-voltmeter and RF signal Input signal 15.734kHz at 50mVrms instrument generator. Test point TP168 (Sig.),TP169 (GND)
  • Page 33: Mechanism Operation Flowchart And Troubleshooting Guide

    VC-A582U VC-A582U(A) VC-H982U...
  • Page 34 VC-A582U VC-A582U(A) VC-H982U...
  • Page 35 VC-A582U VC-A582U(A) VC-H982U...
  • Page 36 VC-A582U VC-A582U(A) VC-H982U...
  • Page 37 VC-A582U VC-A582U(A) VC-H982U...
  • Page 38 VC-A582U VC-A582U(A) VC-H982U...
  • Page 39: Troubleshooting

    VC-A582U VC-A582U(A) VC-H982U...
  • Page 40 VC-A582U VC-A582U(A) VC-H982U...
  • Page 41 VC-A582U VC-A582U(A) VC-H982U...
  • Page 42 VC-A582U VC-A582U(A) VC-H982U...
  • Page 43 VC-A582U VC-A582U(A) VC-H982U...
  • Page 44 VC-A582U VC-A582U(A) VC-H982U...
  • Page 45 VC-A582U VC-A582U(A) VC-H982U...
  • Page 46 VC-A582U VC-A582U(A) VC-H982U...
  • Page 47 VC-A582U VC-A582U(A) VC-H982U...
  • Page 48 VC-A582U VC-A582U(A) VC-H982U...
  • Page 49 VC-A582U VC-A582U(A) VC-H982U...
  • Page 50 VC-A582U VC-A582U(A) VC-H982U...
  • Page 51: Block Diagram

    VC-A582U VC-A582U VC-A582U(A) VC-A582U(A) VC-H982U VC-H982U 8. BLOCK DIAGRAM POWER CIRCUIT BLOCK DIAGRAM...
  • Page 52 VC-A582U VC-A582U VC-A582U(A) VC-A582U(A) VC-H982U VC-H982U SYSTEM SERVO BLOCK DIAGRAM...
  • Page 53 VC-A582U VC-A582U VC-A582U(A) VC-A582U(A) VC-H982U VC-H982U SIGNAL FLOW BLOCK DIAGRAM (VC-A582U/A582U(A)) Recording luminance signal Playback luminance signal Audio recording signal EE signal Recording chroma signal Playback chroma signal Audio playback signal...
  • Page 54 VC-A582U VC-A582U VC-A582U(A) VC-A582U(A) VC-H982U VC-H982U Recording luminance signal Playback luminance signal Audio recording signal EE signal SIGNAL FLOW BLOCK DIAGRAM (VC-H982U) Recording chroma signal Playback chroma signal Audio playback signal...
  • Page 55 VC-A582U VC-A582U VC-A582U(A) VC-A582U(A) VC-H982U VC-H982U SCHEMATIC DIAGRAM • The indicated voltages in the following diagram IMPORTANT SAFETY NOTICE: are measured with an SSVM, upon receiving color bars (400 Hz sound signal) in either the PARTS MARKED WITH " å " (...
  • Page 56 VC-A582U VC-A582U VC-A582U(A) VC-A582U(A) VC-H982U VC-H982U 9. SCHEMATIC DIAGRAM AND PWB FOIL PATTERN MAIN CIRCUIT(1) (VC-A582U/A582U(A)) * VOLTAGE MEASUREMENT MODE PB ..Parentheses ( REC ..Without Parentheses...
  • Page 57 VC-A582U VC-A582U VC-A582U(A) VC-A582U(A) VC-H982U VC-H982U MAIN CIRCUIT(1) (VC-H982U) * VOLTAGE MEASUREMENT MODE PB ..Parentheses ( REC ..Without Parentheses...
  • Page 58 VC-A582U VC-A582U VC-A582U(A) VC-A582U(A) VC-H982U VC-H982U MAIN CIRCUIT(2) (VC-A582U/A582U(A)) * VOLTAGE MEASUREMENT MODE PB ..Parentheses ( REC ..Without Parentheses...
  • Page 59 VC-A582U VC-A582U VC-A582U(A) VC-A582U(A) VC-H982U VC-H982U MAIN CIRCUIT(2) (VC-H982U) * VOLTAGE MEASUREMENT MODE PB ..Parentheses ( REC ..Without Parentheses...
  • Page 60 VC-A582U VC-A582U VC-A582U(A) VC-A582U(A) VC-H982U VC-H982U MAIN CIRCUIT(3) * VOLTAGE MEASUREMENT MODE PB ..Parentheses ( REC ..Without Parentheses...
  • Page 61: Schematic Diagram And Pwb Foil Pattern

    VC-A582U VC-A582U VC-A582U(A) VC-A582U(A) VC-H982U VC-H982U MAIN CIRCUIT(4) (VC-H982U) * VOLTAGE MEASUREMENT MODE PB ..Parentheses ( REC ..Without Parentheses...
  • Page 62 VC-A582U VC-A582U VC-A582U(A) VC-A582U(A) VC-H982U VC-H982U PWB FOIL PATTERN MAIN PWB...
  • Page 63 VC-A582U VC-A582U(A) VC-H982U OPERATION PWB R834 RJ801 R833 R832 R841 R882 R883 F 5 4 7 1 A J R881...
  • Page 64 VC-A582U VC-A582U(A) VC-H982U...
  • Page 65 Be sure to replace these parts with specified ones for maintaining DUNTK5470TEV3(VC-A582U) the safety and performance of the set. MAIN UNIT "HOW TO ORDER REPLACEMENT PARTS" TUNER AND ASSEMBLY UNIT Contact your nearest SHARP Parts Distributor. TU101 VTUENG56701-1 Tuner For location of SHARP Parts Distributor. Call Toll-free 1-800-BE-SHARP INTEGRATED CIRCUITS...
  • Page 66 VHD15DF1FC/1E V Diode (VC-H982U) å D907 VHD10ELS4//-1 Diode R164 RVR-M4340GEZZ J 47k(B), Separation (1) å D908 VHD1S40////-1 Diode ADJ. (VC-H982U) å D909 VHD10ELS4//-1 Diode R165 RVR-M4331GEZZ J 4.7k(B), Separation (2) å D911 RH-EX0601GEZZ J Zener Diode ADJ. (VC-H982U) å D912...
  • Page 67 VC-A582U VC-A582U(A) VC-H982U Ref. No. Part No. Description Code Ref. No. Part No. Description Code CAPACITORS (Continued) CAPACITORS (Continued) C355 VCKYCY0JF105Z V 6.3V Ceramic C176 VCE9EA1HW474M V 0.47 50V ELECT. (N.P) AB (VC-H982U) (VC-H982U) C356 VCCCCY1HH101J V 100p 50V Ceramic...
  • Page 68 VC-A582U VC-A582U(A) VC-H982U Ref. No. Part No. Description Code Ref. No. Part No. Description Code CAPACITORS (Continued) CAPACITORS (Continued) C655 VCEA9M0JW226M V 6.3V Electrolytic C717 VCKYCY1HB221K V 220p 50V Ceramic (VC-H982U) C718 VCKYCY1CF104Z V 16V Ceramic C656 VCKYCY1HB472K V 4700p 50V Ceramic...
  • Page 69 VC-A582U VC-A582U(A) VC-H982U Ref. No. Part No. Description Code Ref. No. Part No. Description Code CAPACITORS(Continued) RESISTORS (Continued) C953 VCEA9M1HW475M V 50V Electrolytic R203 VRS-CY1JF332J 3.3k 1/16W Metal Oxide AA C954 VCEA9M1HW105M V 50V Electrolytic R207 VRD-RA2BE101J V 100 1/8W...
  • Page 70 VC-A582U VC-A582U(A) VC-H982U Ref. No. Part No. Description Code Ref. No. Part No. Description Code RESISTORS (Continued) RESISTORS (Continued) R671 VRS-CY1JF123J 12k 1/16W Metal Oxide AA R611 VRS-CY1JF393J 39k 1/16W Metal Oxide AA (VC-H982U) (VC-A582U/A582U(A)) R672 VRS-CY1JF472J 4.7k 1/16W Metal Oxide AA...
  • Page 71 VC-A582U VC-A582U(A) VC-H982U Ref. No. Part No. Description Code Ref. No. Part No. Description Code RESISTORS(Continued) RESISTORS (Continued) R748 VRS-CY1JF103J 10k 1/16W Metal Oxide AA R958 VRD-RA2EE182J V 1.8k 1/4W Carbon R750 VRS-CY1JF474J 470k 1/16W Metal Oxide AA R959 VRD-RA2BE103J V...
  • Page 72 VC-A582U VC-A582U(A) VC-H982U Ref. No. Part No. Description Code Ref. No. Part No. Description Code MECHANISM CHASSIS DUNTK5471TEV0 OPERATION UNIT (VC-A582U/H982U) RESISTORS LBNDK1011AJZZ V Tension Band Ass’y R881 VRS-CY1JF222J 2.2k 1/16W Metal Oxide AA LBOSZ1007AJZZ V Tension Arm boss R882 VRS-CY1JF332J 3.3k 1/16W Metal Oxide AA...
  • Page 73 VC-A582U VC-A582U(A) VC-H982U Ref. No. Part No. Description Code Ref. No. Part No. Description Code MECHANISM CHASSIS QCNW-0272AJZZ V FFC for A/C Head (VC-A582U(A)only) QPWBF5469AJZZ V A/C Head PWB QSOCN0605REN1 V Socket, 6 pin LBNDK1011GEZZ J Tension Band Ass’y RHEDT0036AJZZ V...
  • Page 74 VC-A582U VC-A582U(A) VC-H982U Ref. No. Part No. Description Code Ref. No. Part No. Description Code SCREW, NUTS AND WASHERS QSOCN0605REN1 V Socket, 6 pin RHEDT0036AJZZ V Full Erase Head RHEDU0088GEZZ J A/C Head Ass’y XBPSD26P08000 V Screw 2.6P+8S A/C Head AA...
  • Page 75 VC-A582U VC-A582U(A) VC-H982U Ref. No. Part No. Description Code Ref. No. Part No. Description Code MSPRT0381GEFJ J Double Action Spring CASSETTE HOUSING CONTROL (VC-A582U(A)) NGERH1278AJZZ V Drive Gear L CHLDX3080TEV1 V Cassette Housing (VC-A582U/H982U) Control Ass’y NGERH1278GEZZ J Drive Gear L...
  • Page 76 VC-A582U VC-A582U(A) VC-H982U Ref. No. Part No. Description Code Ref. No. Part No. Description Code MECHANICAL PARTS FRONT PANEL PARTS GCABA1092AJKB V Top Cabinet CPNLC2327TEV1 V Front Panel Ass’y (VC-A582U/H982U) (VC-A582U) GCABB1185AJKB V Main Frame CPNLC2327TE00 V Front Panel Ass’y...
  • Page 77: Replacement Parts List

    VC-A582U VC-A582U(A) VC-H982U Ref. No. Part No. Description Code Ref. No. Part No. Description Code SUPPLIED ACCESSORIES ACCESSORIES QCNW-0298AJZZ V 75 ohm Coaxial Cable RRMCG0235AJSA V Infrared Remote Control 90A64EC2078A Battery Cover, Infrared Remote Control TiNS-3224AJZZ Operation Manual (VC-A582U/H982U) TiNS-3224EJZZ...
  • Page 78: Exploded View Of Mechanical Parts

    VC-A582U VC-A582U(A) VC-H982U 11. EXPLODED VIEW OF MECHANICAL PARTS MECHANISM CHASSIS PARTS...
  • Page 79 VC-A582U VC-A582U(A) VC-H982U CASSETTE HOUSING CONTROL PARTS...
  • Page 80 VC-A582U VC-A582U(A) VC-H982U MECHANICAL PARTS...
  • Page 81 VC-A582U VC-A582U(A) VC-H982U FRONT PANEL PARTS (VC-A582U/A582U(A)) 501-7 501-3 501-2 501-1 501-5 501-4 PRECAUTION ON FRONT PANEL SET-UP Cassette cover Front panel Cassette housing Cassette cover open lever Cassette cover Cassette cover Cassette cover open lever open lever About 45°...
  • Page 82 VC-A582U VC-A582U(A) VC-H982U FRONT PANEL PARTS (VC-H982U) 501-7 501-3 501-8 501-2 501-6 501-8 501-1 501-5 501-4 PRECAUTION ON FRONT PANEL SET-UP Cassette cover Front panel Cassette housing Cassette cover open lever Cassette cover Cassette cover Cassette cover open lever open lever About 45°...
  • Page 83: Packing Of The Set

    Infrared Remote Control Unit SPAKP0098AJZZ (VC-A582U(A)) Polyethyrene Sack Dry Battery SPAKX1003AJZZ (VC-A582U/H982U) SPAKX1004EJZZ (VC-A582U(A)) Buffer Material FRONT SPAKC3631AJZZ (VC-A582U) SPAKC3631EJZZ (VC-A582U(A)) SPAKC3632AJZZ (VC-H982U) Packing Case Use 8 staples to fix the bottom of packing case. TLABK0005AJZZ NO. Card FRONT MARK Not Replacement Item...
  • Page 84 VC-A582U VC-A582U(A) VC-H982U COPYRIGHT C 1998 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Vc-a582u(a)Vc-a582u

Table of Contents