Sanyo GCD2000 Instruction Manual page 17

c) Fade-out edit recording
The sound is automatically faded out at the end of sides A
and B, according to the selected tape length.
Fade out (1O sec.)
SIDE A 30 min.
I
1,2, 3
H
4
H
[1 H
Manual reverse
10 " 9
8
I
Fade out (1O sec.)
Record from the beginning of a track. SIDE B 30 min.
Example:
6. Follow steps "6" to"1 O" of "Normal edit recording".
To record onto a 60-minute tape
1. Press the EDIT button until "C-60" appears on the -
"FADE" blinks as the sound fades out (1O seconds).
display.
When the remaining tape length is less than 10 sec.,
2. Press the FADE button.
the track currently playing is not faded out.
"FADE" appears.
The sound is also faded out when a track is interrupted
3. Insert a C-60 cassette tape into the tape deck to record
at the end of side B.
side A.
(If you desire, program the tracks. Refer to "Pro-
grammed play" on page 10.)
4. Press the REC button.
5. Press the D/00 button. Recording starts.
The player will start playback with track 1 on sideA and
proceed in sequence until track 6 is recorded. The
display indicates:
DISC 1 TRACK 1 FADE 0.01 EDITD SIDE A
123...
d) Backward skip edit recording
Track 4 will be interrupted.
EEiHi@B~Man
SIDE B T
Record from the beginning of a track,
Track 8 will be interrupted.
1, Press the EDIT button until "C---" appears on the
display.
2. Press the REC button.
3. Press the D/00 button.
Recording starts on side A with track 1.
4. Follow steps "6" to "9" of "Normal edit recording".
MANUAL RECORDING
For programmed recording, program the material in
advance (as described under "PROGRAMMED PLA'f').
1. Press the REC button.
2. Press the D/On button. Recording starts.
If the FADE button is pressed during recording, the
sound begins to fade out from that point (about 10
seconds). The CD player pauses, but the deck contin-
ues recording.
-16-
—