Special Programs; I-Temp Advanced" Programme; Antishine" Programme; Calc'nclean" Programme - Bosch SENSIXX DS38 Operating Instructions Manual

Tips:
• Sort your garments out based on their
cleaning symbol labels, always starting
with clothes that have to be ironed at the
lowest temperatures.
• For mixed fabrics, select the temperature
corresponding to the most delicate fabric.
• If you are not sure what the garment
is made of then begin ironing at a low
temperature and decide on the correct
temperature by ironing a small section not
usually seen when worn
• At the beginning of each use, it is
possible that drops of water will be
dispensed alongside steam.
Therefore, it is advisable to try the iron
on the ironing board or a piece of cloth to
start with.
• For better ironing results, iron the last
strokes without steam to dry the garment.

3. Special programs

3.1 "i-Temp Advanced"
programme
This steam station has an "i-Temp
Advanced" programme. If this programme is
selected, an appropriate combination of
temperature and steam is set, which is
suitable for all fabrics that can be ironed.
The "i-Temp Advanced" programme
prevents clothes from being damaged due
to an unsuitable temperature being
selected.
* Model dependent
The "i-Temp Advanced" programme does
not apply to fabrics that cannot be ironed.
Please check the garment care label for
details or try ironing on a part of the cloth
not visible normally.

3.2 "AntiShine" programme

This steam station has an "AntiShine"
programme. If this programme is selected
and the steam release button (14 or 15*) is
regularly pressed, the risk of shiny marks
on the garment due to the ironing is
reduced.

3.3 "Calc'nClean" programme

See section 11.
9
BOS CH