JVC KD-DV9406 Instructions Manual page 41

Category Indication
LCD Type
Display type
Font Type
Font type
Tag
Tag display
NTSC/PAL *
6
Video format
IF Band
Intermediate
frequency band
Ext Input *
7
External input
Amp Gain
Amplifier gain
control
Rear Spk *
8
Rear speaker output
Color Sel
Color selection
Color Set
Color setting
Red
Green
Blue
*
4 Depends on the "Dimmer" setting.
*
5 Not applicable for folder/file/Tag name display if "Language" is set to "(Traditional Chinese)," "(Simplified Chinese),"
"(Korean)," "(Thai)," "(Arabic)," or "(Persian)." Depending on the recording method of the folder/file/Tag name, the
setting may or may not apply if "Language" is set to "Auto."
*
6 The newly selected video format takes effect only after you turn on the power again or change the source.
*
7 Displayed only when one of the following sources is selected—FM, AM, DISC, USB, LINE IN, AV IN, or Bluetooth.
*
8 Displayed only when Dual Zone is activated (see page 25).
* 9 Depends on the "Dimmer" setting.
Downloaded from Caradio-Manual.com Manuals
Item Setting, [reference page]
( : Initial)
: Positive pattern will be selected during the day time *
• Auto
negative pattern will be used during the night time *
• Positive : Positive pattern of the display.
• Negative : Negative pattern of the display.
• 1 : Select the font type used on the display.
• 2 *
5
• On : Shows the tag while playing MP3/WMA/AAC/WAV tracks.
• Off : Cancels.
• PAL : Select this if your monitor is of the PAL color system.
• NTSC : Select this if your monitor is of the NTSC color system.
• Auto : Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
• Wide : Subject to interference noises from adjacent stations, but
sound quality will not be degraded and the stereo effect will
remain.
• Changer : To use a JVC CD changer, [32], or an Apple iPod, [33].
• Ext In : To use any other external component, [35].
• High PWR : Volume 00 – Volume 50
• Low PWR : Volume 00 – Volume 30 (Select if the maximum power of each
speaker is less than 50 W to prevent damaging the speaker.)
• On : Select this to turn on the rear speaker output.
• Off : Cancels.
Initial: All : Select your favorite display color for each source (or for all
Source; sources), [42, 43].
Color: Pale
— : Create your own colors, and select them for the display color,
[43].
: User color during the day time *
Day Color
NightColor : User color during the night time *
00 — 11 : Initial: Day Color: 07, NightColor: 05
00 — 11 : Initial: Day Color: 07, NightColor: 05
00 — 11 : Initial: Day Color: 07, NightColor: 05
4 ; while
4 .
9 .
.
9
SETTINGS 41