Siemens HiPath 2000 User Manual page 106

Making calls in the team/executive/secretary configuration
Step by step
Forward Line: Off
106
Deactivating call forwarding
N
Open the Program/Service menu
Select and confirm the option shown.
R
Press the required trunk key.
or
j
Enter the required trunk number.
or
R
If available, press the "CFW MULAP" key.
If you have activated call forwarding for a trunk, a
special dial tone sounds when the line is seized.
Understanding LED messages of the "CFW MULAP"
key
S
The LED on the "CFW MULAP" key is off - call forward-
ing is not active for this trunk.
or
R
The LED on the "CFW MULAP" key lights up - call for-
warding is active for this trunk.
or
T
The LED on the "CFW MULAP" key flashes slowly - the
trunk is the destination of call forwarding.
page 23.