D-Link MyDlink DCH-S150 Quick Install Manual page 6

1. How do I reset the DCH-S150?
When you reset your DCH-S150, it will change your
settings back to the factory default settings. To reset
the device, locate the Reset button on the side of the
device. With the device plugged in, press and hold the
Reset button until the status LED turns red (for about
10 seconds).
2. Why isn't the Power/Status LED turning on when I plug in my DCH-S150?
If the Power LED is not turning on:
a. Make sure the outlet you are using is working properly. Try plugging
in another device to see if it works.
b. Make sure that if the outlet is controlled by a light switch, it is in
the ON position.
c. Try a different outlet to see if the Motion Sensor works there.
3. Why can't I connect to my wireless router?
If you are having trouble connecting to your wireless router, try plugging
the DCH-S150 into a location that is closer to your router. After the Power/
Status LED turns solid green, you can unplug the Motion Sensor and move
it to the desired location.
4. Where can I find the mydlink
You may download the free mydlink
Google Play Store (Android). Search for the mydlink
in "mydlink home".
5. How do I set up push notifications to notify me when motion is
detected?
Open the mydlink Home app, tap on the "My Actions" icon on the top right,
tap "New Rule" and select the motion sensor you want as the trigger. Tap
"Next" and then tap "Send Notification", then tap "Next". Enter in a name for
your rule to complete the setup of push notifications.
FAQs
Home app?
TM
Home app from the App store (iOS) or
TM
6
Home app by typing
TM
Reset