Advertisement
Appendix A
Field Name
LP Checksum Link Privacy Checksum value
Number of
Nodes
RF Channel
NC Node ID
DRIVERS - MoCA SUMMARY PG 2A
Field Name
TX Unicast
PHY Rate
(Mbps)
Broadcast
PHY Rate
(Mbps)
DRIVERS - MoCA SUMMARY PG 2B
Field Name
Local Node
Rx Level
(dBm)
Approx Path
Loss (dB)
20
Description
Number nodes present on the
MoCA network, not including
the current node
Channel center frequency of
the MoCA network (in MHz)
Node ID of the network
coordinator
Description
Transmit rate from the local node
to each other node in the
network (in Mbps)
Broadcast PHY rate of each
remote node (other than this set-
top/node) in the MoCA network
(in Mbps)
Description
Receive level from each other
node to the local node.
Approximate loss from each
node to the local node.
Possible Values
[Integer > 0]
Important: For two or more
devices to form a MoCA network,
their LP checksums must match,
when Link Privacy is enabled.
[Integer ≥ 1]
The total number of nodes in the
network is the Number of Nodes +
1.
Value: 1150 MHz
Note: The RF channel frequency
is 1150 MHz. If it is not, record the
frequency for comparison with
other devices on the network.
[Range: 0 – N] where N = 15 for
MoCA 1.1
Possible Values
[Integer > 0]
Note: Minimum value is 200 Mbps,
lower rates require fixing the home
coaxial wiring.
Wait at least 30 seconds after Link
Up is achieved.
[Integer > 0]
Note: Minimum value is 200 Mbps,
lower rates require fixing the home
coaxial wiring.
Possible Values
[Integer < 0]
[Integer > 0]
Important: Losses greater than 50
dB can indicate a problem with the
home wiring. These problems must
be fixed so that the losses are less
than 50 dB.
TP-00116-01
Hide quick links:
Advertisement
